USER GUIDE 1 V1.0.
About This User Guide Pls read all the content of the user guide carefully to use the products safely and effectively. You are advised of keeping it properly for your using reference. Disclaimer Please do not dismantle the product or tear up the seal on it, otherwise we won’t provide warranty or replacement service. The pictures in this user guide are for reference only. If there are any pictures which not match the actual product, please take actual products as the standard.
Version Record Version number Version description Version date Initial version 2020-1-16 SV1.0_TS_HV1.0_PTY_P1_ Test_20200116_4.6.191018. 250718 SV1.1_ZS_HV1.0_QRY_P1_ _202000301_4.6.200211.250 2020-3-28 718 1.Fixed bug: Enable/Disable all symbologies; SV1.6_ZS_HV1.2_QRY_P1__2 2.Fixed bug: Enable/Disable 2D Barcodes; 0200414_4.7.200320.250718 3.
CATALOG 1. Product Introduction ................................................................................................................... 9 1.1 Main feature ...................................................................................................................... 9 1.2 Unpack your device ........................................................................................................... 9 1.3 Communication port ....................................................................
2.2.12 GS Control character substitution(Enable character escape first) ............................ 19 2.2.13 Prefix setting ........................................................................................................ 19 2.2.14 Suffix setting ........................................................................................................ 19 2.2.15 Unicode Output Mode .......................................................................................... 20 2.2.16 Inverse code option.
2.10.1 Enable/disable all Symbologies ............................................................................. 28 2.10.2 Enable/disable all 1D Symbologies ....................................................................... 28 2.10.3 Enable/disable all 2D Symbologies ....................................................................... 29 2.10.4 Codabar ............................................................................................................... 29 2.10.
2.10.23 Code 128（GS1-128、ISBT-128） .................................................................... 35 2.10.24 Code 128 Limitation of length............................................................................. 35 2.10.25 UPC-A ............................................................................................................... 36 2.10.26 UPC-A check bit ................................................................................................. 36 2.10.27 UPC-A to EAN-13..........
2.11 User-defined suffix setting .............................................................................................. 42 2.12 Barcode prefix&suffix order selection ............................................................................ 42 2.13 Code ID setting .............................................................................................................. 43 2.14 AIM ID setting........................................................................................................
1. Product Introduction This user guide applies to EP2000, which identify 1D&2D barcodes by 2D image scanning pattern. The scanners above are of strong identification capability, and support automatic continuous scanning mode with fast and flexible scanning speed. In this chapter, we will introduce the instruction of scanner with pictures, please compare to the scanner you bought when reading this user guide, which is good for your understanding.
USB USB interface on host RS-232 interface on RS-232 host 1.4 Start-up, shutdown, standby and restart Start-up：Connect host computer with scanner, which will automatically start-up and in working state. Shutdown：Remove the data cable which is connected with scanner; remove the USB which is connected with host computer; remove the power adapter which is inserted into RS-232 serial port.
If the barcode is highly reflective (for example, the coated surface), you may need to tilt the barcode at an angle to successfully scan it.
Configuration Code Turn on（Default) 2. Barcode Setting This model of laser desktop barcode scanner is designed to change settings by reading some special barcode, which we will give you a detailed introduction and show you all the barcodes for the corresponding setting in this section. The greatest advantage of this setting method is direct, intelligible and user friendly. 2.
Configuration Code Turn on（Default) 2.2.2 Restore Factory Defaults Restore Factory Defaults 2.2.3 Read product batch version product batch version 2.2.4 Read user defaults Save the curr ent menu set tings as user - def ined menu set tings. Save user def aults You can r estor e the menu settin gs f or the user -def ined menu settin gs. R estore user def aults 2.2.5 Interface Setting This desktop scanner support U SB KB, USB to serial por t , seri al port interf ace.
Configuration Code Turn on（Default) H ost mod e(C ommand d ecodin g + p hysi cal seri al p ort ) Scanning this barcode in USB mode is not effec tive You can set ser ial port int erf ace by scanning below barc ode. Serial por t(D ef aults) You can s et U SB to ser ial port int erf ace by scanning bel ow barcode. (N eed drive, pl eas e cont act the sal es) U SB to seri al port USB upgrade 2.2.6 Serial port setting 2.2.6.
Configuration Code Turn on（Default) Baud Rate 38400 Baud Rate 19200 Baud Rate 57600 Baud Rate 115200 2.2.6.
Configuration Code Turn on（Default) 7data bits, 2stop bits, no check bit 7data bits, 2stop bits, even check bit 7data bits, 2stop bits, odd check bit 8data bits, 1stop bits, no check bit（default） 8data bits, 1stop bits, even check bit 8data bits, 1stop bits, odd check bit 8data bits, 2stop bits, no check bit 8data bits, 2stop bits, even check bit 16
Configuration Code Turn on（Default) 8data bits, 2stop bits, odd check bit 2.2.7 Time out setting In manual key mode, it is allowed to select the automatic sleep function in idle time. "Idle" means that there is no key and no communication for a certain period of time. Automatic sleep is to enable the device to enter a state of low power consumption. When there is trigger signal or upper computer communication, it will automatically recover from sleep state to working state.
Configuration Code Turn on（Default) Auto-sensing mode (default) 2.2.9 Lighting Control Normal mode (default) Lighting always off Lighting al ways on 2.2.10 Aiming light control Normal mode (default) Aiming light always off Aiming li ght al ways on 2.2.
Configuration Code Turn on（Default) D isabl e contr ol char act er escape （ def aul t） 2.2.12 GS Control character substitution(Enable character escape first) Not replaced Replace with | 2.2.13 Prefix setting Cancel prefix (default) 2.2.
Configuration Code Turn on（Default) 2.2.15 Unicode Output Mode In order to output correctly according to the specified encoding format, you need to specify the output encoding format, such as Simplified Chinese in Notepad / excel output configuration into GBK encoding, in Word and other output configured into UNICODE encoding.
式 Configuration Code Turn on（Default) （Only 1D/DataMatrix/Aztec） Only Decode Normal Code Only Decode Inverse code（Not enable） Decode Both Normal Code And Inverse Code(default) 2.2.17 Virtual keyboard Mode 1: Characters between 0x20 and 0xFF are output by virtual keyboard mode which is not supported in the current keyboard layout.Characters between 0x00 and 0x1F are output according to control character definition.（See Appendix） Mode 2：Characters between 0x20 and 0xFF are output by virtual keyboard.
Configuration Code Turn on（Default) Enable virtual keyboard（mode 2） Enable virtual keyboard（mode 3） 2.3 Buzzer , LED indicator barcode and vibration prompt setting barcode 2.3.1 Beeper Volume setting Low volu me H i gh volu me(def ault) 2.3.2 Start-up beep Shu t d own start -up b eep Op en start-up b eep （ d efaul t） 2.3.
Configuration Code Turn on（Default) g ood read b eep off （ d efaul t） 2.3.4 Beep pitch-good read Low pitch(def ault） Midd l e p i tch H igh pi tch 2.3.5 Beep duration-good read Ton e l ong（ d efaul t） Ton e pi p 2.3.6 Error sound You wi l l h ear 4 con tinu e al arm sound s wh en d ata u pl oad fail ure, on e sin gl e al arm soun d mean s scan in di stin gui sh abl en ess b arcod e.
Configuration Code Turn on（Default) err or s ound mi ddle pi tch error sound hi gh pitch 2.3.7 Good-read LED Good - read LED off Good - read L ED on（ d efau l t） 2.4 Timeout between decodes (Same barcodes)（Self-induction mode） 2.4.1 Time out between same decode Used to configure the interval time for solving the same barcode. If the setting time is not exceeded, the same barcode will be solved only once.
Configuration Code Turn on（Default) 2.5 USB keyboard update speed setting There barcode is used to set the update speed when scanner is in USB keyboard pattern. If the performance of your PC is lower, we suggest you choose slow update speed to make sure the scanner update the right data. Slow update speed (default) Middle update speed Fast update speed (default) Custom update speed (2ms~50ms) 2.
Configuration Code Turn on（Default) Normal output (default) Case reversal All Caps All lowercase 2.
Configuration Code Turn on（Default) Japanese（Not enable） Portuguese (Portugal) Portuguese (Brazil) Turkish Q French (Belgium) 2.
Configuration Code Turn on（Default) Transmit start and end fields only Set start field length Set end field length 2.10 Symbologies 2.10.1 Enable/disable all Symbologies Enable all barc ode might s low down scanner decode speed. W e suggest enabl e th e barc ode y ou need based on y our scene. Enable all barc ode is def ault Enable All Symbol ogi es （ D ef ault） D isabl e All Symbologi es 2.10.
Configuration Code Turn on（Default) Di sabl e All 1D Symbologie s 2.10.3 Enable/disable all 2D Symbologies Enable Al l 2D Symbol ogi e s Di sabl e all 2D Symbologie s 2.10.4 Codabar Enable Codabar Disable Codabar 2.10.5 Codabar start/ending character setting Don’t send Codabar start/ending character (default) Send Codabar start/ending character 2.10.
Configuration Code Turn on（Default) Codabar min length（1~127bit） Codabar max length（1~127bit） 2.10.7 Code 39 Enable Code 39 Disable Code 39 2.10.8 Code 39 check bit Disable Code 39 check bit (default) Enable Code 39 check don’t send check bit Enable Code 39 check send check bit（default） 2.10.
Configuration Code Turn on（Default) Disable Full ASCII (default) 2.10.10 Code 39 limitation of length Code 39 max length (1~127bit) Code 39 min length (1~127bit) 2.10.11 Code 32 (Code 39 needs to be enabled） Enable Code 32(default) Disable Code 32 2.10.12 Interleaved 2 of 5 （ITF5） Enable ITF25 Disable ITF25 2.10.
Configuration Code Turn on（Default) Disable ITF25 check (default) Enable ITF25 check don’t send check bit Enable ITF25 check send check bit 2.10.
Configuration Code Turn on（Default) ITF25 14 bit length ITF25 16 bit length ITF25 ITF25 20 bit length ITF25 ITF25 18 bit length 22 bit length 24bit length 2.10.15 Interleaved 2 of 5 Limitation of length Interleaved 2 of 5 min limitation length （4~128 bit） Interleaved 2 of 5 max limitation length (4~128bit 2.10.
Configuration Code Turn on（Default) Enable Industrial 2 of 5 Disable Industrial 2 of 5 2.10.17 Industrial 2 of 5 Limitation of length Industrial 2 of 5 min length (4~128bit) Industrial 2 of 5 max length (4~128bit) 2.10.18 Matrix 2 of 5 (matrix 25 code)（4-24 bit） Enable Matrix 2 of 5 Disable Matrix 2 of 5 2.10.19 Matrix 2 of 5 Limitation of length Matrix 2 of 5 min length (4~128 bit) Matrix 2 of 5max length (4~128bit) 2.10.
Configuration Code Turn on（Default) Enable Code 93 Disable Code 93 2.10.21 Code 93 Limitation of length Code 93 min length（1~127 bit） Code 93 max length（1~127bit） 2.10.22 Code 11 Enable Code 11 Disable Code 11 (default) 2.10.23 Code 128（GS1-128、ISBT-128） Enable Code 128 Disable Code 128 2.10.
Configuration Code Turn on（Default) Code 128 min length (1~127 bit) Code 128 max length (1~127 bit) 2.10.25 UPC-A Enable UPC-A Disable UPC-A 2.10.26 UPC-A check bit Send UPC-A check bit (default) don’t send UPC-A check bit 2.10.
Configuration Code Turn on（Default) Disable UPC-A to EAN-13 (default) 2.10.28 UPC-E Enable UPC-E Disable UPC-E 2.10.29 UPC-E check bit Send UPC-E check bit (default) Don’t send UPC-E check bit 2.10.30 UPC-E expand UPC-A Enable UPC-E expand UPC-A Disable UPC-E expand UPC-A (default) 2.10.
Configuration Code Turn on（Default) Enable EAN/JAN-8 Disable EAN/JAN-8 2.10.32 EAN/JAN-13 Enable EAN/JAN-13 Disable EAN/JAN-13 2.10.33 UPC/EAN/JAN extra-code Ignore UPC/EAN/JAN extra-code (default) Decode UPC/EAN/JAN extra-code Adapt UPC/EAN/JAN extra-code 2.10.
Configuration Code Turn on（Default) 2.10.35 EAN13 to ISSN Enable EAN13 to ISSN Disable EAN13 to ISSN(default) 2.10.36 GS1 DataBar（RSS14）(Stacked) Enable GS1 DataBar Disable GS1 DataBar 2.10.37 GS1 DataBar Limited Enable GS1 DataBar Limited Disable GS1 DataBar Limited 2.10.38 GS1 DataBar Expanded Enable GS1 DataBar Expanded Disable GS1 DataBar Expanded 2.10.
Configuration Code Turn on（Default) Enable PDF417 Disable PDF417 2.10.40 Micro PDF417 Enable Micro PDF417 Disable Micro PDF417 2.10.41 QR Code Enable QR Disable QR Disable QR Code URL Link Enable QR Code URL Link（Default） 2.10.
Configuration Code Turn on（Default) Enable Micro QR Disable Micro QR(default) 2.10.43 Data Matrix Enable Data Matrix Disable Data Matrix 2.
Configuration Code Turn on（Default) User-defined prefix (Please follow the barcode type ID table and data and edit barcode in the appendix after scanning) 2.11 User-defined suffix setting Output options Enable user-defined suffix output Disable user-defined suffix output (default) Edit Clear all user-defined suffixes user-defined suffix (Please follow the barcode type ID table and data and edit barcode in the appendix after scanning) 2.
Configuration Code Turn on（Default) (default) Suffix (default) 2.13 Code ID setting Output options Disable CODE ID(default) Enable CODE ID former barcode Enable CODE ID latter barcode 2.
Configuration Code Turn on（Default) Disable barcode AIM ID (default) Enable former barcode AIM ID Enable latter barcode AIM ID 44
Appendix Appendix 1 Data and edit barcode 0 1 2 3 4 5 6 7 8 9 - 45 -
A B C D E F Cancel a string of data read before Cancel setting current Cancel a string of data read before - 46 -
Sav e Appendix 2 Barcode type ID table Barcode type HEX CODE ID(default) All code system 99 Codabar 61 a Code128 6A j ISBT-128 6A j Code32 3C < Code93 69 i Code39 62 b Code11 48 H Plessey 70 p MSI plessey 6D m EAN-13 64 d EAN-8 64 d 52 R GS1 DataBar Limited 52 R GS1 DataBar Expanded 52 R GS1-128 (EAN-128) 6A j Interleaved 2 of 5 65 e Matrix 2 of 5 76 v Industry 2 of 5 44 D Stamdard 25 73 s GS1 DataBar（RSS14） (Stacked) 2 of 5 - 47 -
UPC-A 63 c UPC-E 63 c ISBN 42 B ISSN 6E d DataMatrix 75 u PDF417 72 r Micro PDF417 53 s QR Code 51 Q Micro QR Code 51 Q Barcode type AIM ID Description Codabar ]Fm m：0~1 Code128 ]Cm m：0，1，2，4 ISBT-128 ]C4 Code32 ]A0 Code93 ]G0 Code39 ]Am m：0，1，3，4，5，7 Code11 ]Hm m：0，1，3，8，9 Plessey ]P0 MSI plessey ]Mm m：0，1，7，8，9 EAN-13 ]Em m：0，1，3，4 EAN-8 ]Em m：0，1，3，4 All code system GS1 DataBar(RSS14） ]e0 (Stacked) GS1 DataBar Limited ]em GS1 DataBar Expanded
GS1-128 (EAN-128) ]C1 2 of 5 Interleaved 2 of 5 ]Im Matrix 2 of 5 ]X0 Industry 2 of 5 ]S0 Stamdard 25 ]Rm m：0，8，9 UPC-A ]Em m：0，3 UPC-E ]Em m：0，3 ISBN ]X0 ISSN ]X0 DataMatrix ]dm m: 0~6 PDF417 ]Lm m: 0~5 Micro PDF417 ]Lm m: 0~5 QR Code ]Qm m: 0~6 Micro QR Code ]Qm m: 0~6 - 49 - m：0，1，3
Appendix 3 Invisible character ASCII table 10 hex Hex Corresponding character 0 00 NUL 1 01 SOH 2 02 STX 3 03 ETX 4 04 EOT 5 05 ENQ 6 06 ACK 7 07 BEL 8 08 BS 9 09 HT 10 0A LF 11 0B VT 12 0C FF 13 0D CR 14 0E SO 15 0F SI 16 10 DLE 17 11 DC1 18 12 DC2 19 13 DC3 20 14 DC4 21 15 NAK 22 16 SYN 23 17 ETB 24 18 CAN 25 19 EM - 50 -
26 1A SUB 27 1B ESC 28 1C FS 29 1D GS 30 1E RS 31 1F US - 51 -
Appendix 4 Visible character ASCII table Hexadecim 10 hex al Character 10 hex Hexadeci Chara Hexadecim Charac mal cter 10 hex al ter 32 20 64 40 @ 96 60 ` 33 21 ! 65 41 A 97 61 a 34 22 “ 66 42 B 98 62 b 35 23 # 67 43 C 99 63 c 36 24 $ 68 44 D 100 64 d 37 25 % 69 45 E 101 65 e 38 26 & 70 46 F 102 66 f 39 27 ‘ 71 47 G 103 67 g 40 28 ( 72 48 H 104 68 h 41 29 ) 73 49 I 105 69 i 42 2A * 74 4A J 106 6A j
56 38 8 88 58 X 120 78 x 57 39 9 89 59 Y 121 79 y 58 3A : 90 5A Z 122 7A z 59 3B ; 91 5B [ 123 7B { 60 3C < 92 5C \ 124 7C | 61 3D = 93 5D ] 125 7D } 62 3E > 94 5E ^ 126 7E ~ 63 3F ? 95 5F _ - 53 -
Appendix 5 Default setting table Parameter name Default setting Remarks Communication settings Serial port baud rate 9600 Serial check bit No check bit Serial data bit 8 bit Serial port stop 1 bit Host mode OFF USB Keyboard layout American keyboard TTL-232 （default） Barcode content contains carriage only (enter enter character feed processing 0D character CR) Tab （USB keyboard） USB Case conversion Not converting virtual keyboard Off USB keyboard sending speed Fast speed Control chara
Aiming mode Normal mode Prompt output Power on tone on prompt on Beep type audio rate low Decoding success Beep volume tone high Beep duration long code read tone setting Allow Decoding success LED prompt On Data editing Prefix and suffix Prefix adding No add Prefix content No AIM ID No add Code ID No add Suffix adding No add Suffix content No End character adding Add End character content 0x0A，0×0D Parameter name Enter Default setting Remark Open Valid for all bar code
symbol types Code 128 Reading Allow Max length 127 Min length 1 GS1-128（ UCC/EAN-128） Reading Allow 127 Max length 1 Min length EAN-8 Reading Allow EAN-13 Reading Allow 2 bit extension code No reading 5 bit extension code No reading must have the extension code No require ISSN Reading Not allow ISBN Reading Not allow - 56 -
UPC-E Reading allow Output check character Output Expand to UPC-A No expand UPC-A Reading allow Output check character Output UPC-A to EAN-13 Interleaved 2 of Off 5 Reading allow Check No check Max length 128 Min length 4 Matrix 2 of 5 Read Not allow Max length 128 Min length 4 Industrial 2 of 5 Reading allow Max length 128 - 57 -
Min length 4 Standard 2 of 5 Reading allow Check No check Output check character No output Max length 128 Min length 4 Code 39 Reading allow Check No check Output check character No output Support Full ASCII Support Max length 127 Min length 1 Code 32 Reading allow Codabar Reading allow Check No check Send start character and end character No output - 58 - Default (off)
Max length 127 Min length 1 Code 93 Reading allow Max length 127 Min length 1 GS1 Databar（RSS14）(Stacked) Reading allow send AI(01) character Send GS1 Databar Limited Reading allow Send AI(01) character Send GS1 Databar Expanded reading allow Code 11 reading allow Check bit Output Check bit option Off Max length 127 Min length 1 - 59 - Off
Plessey reading Allow Check but don’t output Check bit Max length 127 Min length 1 MSI-Plessey Reading allow Output check Don’t output Check bit mode selection 1 bit MOD10 Max length 127 Min length 1 PDF417 Reading allow Max length 2710 Min length 1 Micro PDF417 Reading allow Max length 2710 Min length 1 QR Code Reading allow - 60 -
Max length 7089 Min length 1 Micro QR Reading allow Max length 7089 Min length 1 Data Matrix Reading allow Max length 3116 Min length 1 - 61 -
Appendix 6 Operational character (USB keyboard) character hexadecimal No escape Escape corresponding corresponding function key combination control key Ctrl+2 NUL (Null char.
DC3 (XOFF) (Device Control 3) 13 Delete Ctrl+S DC4 (Device Control 4) 14 tab+shift Ctrl+T NAK (Negative 15 F12 Ctrl+U SYN Acknowledgement) (Synchronous Idle) 16 F1 Ctrl+V ETB (End of Trans. Block) 17 F2 Ctrl+W CAN (Cancel) 18 F3 Ctrl+X EM (End of Medium) 19 F4 Ctrl+Y SUB (Substitute) 1A F5 Ctrl+Z ESC (Escape) 1B F6 Ctrl+[ FS (File Separator) 1C F7 Ctrl+\ GS (Group Separator) 1D F8 参见下表 Ctrl+] RS (Request to Send) 1E F9 Ctrl+6 US (Unit Separator) 1F
Appendix 7 Operational character (serial port and USB-VCOM) 10 hex Hex Corresponding character 0 00 NUL 1 01 SOH 2 02 STX 3 03 ETX 4 04 EOT 5 05 ENQ 6 06 ACK 7 07 BEL 8 08 BS 9 09 HT 10 0A LF 11 0B VT 12 0C FF 13 0D CR 14 0E SO 15 0F SI 16 10 DLE 17 11 DC1 18 12 DC2 19 13 DC3 20 14 DC4 21 15 NAK 22 16 SYN 23 17 ETB 24 18 CAN 25 19 EM 64
26 1A SUB 27 1B ESC 28 1C FS 29 1D GS 30 1E RS 31 1F US Some feature configuration instructions and examples Example of custom prefix and suffix configuration Configure the barcode pre/suffix by scan code. Each prefix or suffix character can be up to 10.(To ensure that custom suffixes can be output, configure the scanner's custom pre/post suffix output option to be turned on.) Example 1.1: Add a custom prefix XYZ to all types of barcode.
Scan the configuration code Customize The Prefix, then scan the appendix data and edit the 5, 1, 5, 2 in the barcode to save, that is, complete the configuration. Example 1.3：Cancel the custom prefix of the QR code When customizing prefixes and suffixes,behind the barcode type characters are saved without adding other characters,that is, clear the custom prefix and suffix for this type of barcode.
edit the 0 in the bar code, save,the configuration is completed. Scan configuration code Interleaved 2 of 5 maximum length limit,then scan the appendix data and edit the 1, 4 in the bar code, save,the configuration is completed.
