User Manual

Table Of Contents

第

页共

页

Scan the configuration code Customize The Prefix, then scan the appendix data and edit the 5, 1, 5, 2 in

the barcode to save, that is, complete the configuration.

Example 1.3

：

Cancel the custom prefix of the QR code

When customizing prefixes and suffixes,behind the barcode type characters are saved without adding

other characters,that is, clear the custom prefix and suffix for this type of barcode.Scan the configuration

code Customize The Suffix, then scan the appendix data and edit the 5,1 in the bar code, save, and

complete the configuration.

Noted:If there was a prefix added for all barcodes,the configured QR code prefix will be restored to the

prefix added for all barcodes.

If you need to clear the prefix/ suffixes added for various bar code types,please scan "Clear all custom

prefixes

" and "Clear all custom suffixes" configuration code.

Barcode length limit configuration example

When configuring the barcode minimum length limit, you must ensure that the configured

minimum length is not greater than the current maximum length configuration.Otherwise an

error will be indicated.Similarly,when configuring the barcode maximum length limit, must

also ensure that the configured maximum length is not less than the current minimum length

configuration.

Example 2.1: Configuring Code 128 barcode length is 4-12 bits

Scan configuration code Code 128 minimum length limit,then scan the appendix data and

edit the 4 in the bar code, save.

Scan configuration code Code 128 maximum length limit,then scan the appendix data and

edit the 1, 2, and save the barcode to complete the configuration.

Example 2.2：Configure Interleaved 2 of 5 barcode length to 14 bits

Configuring 14 bits of Interleaved 2 of 5 barcode length can scan directly and configure

ITF25 14 bits of barcode lengths for configuration.It can also be configured by the maximum

and minimum length of the barcode:

Scan configuration code Interleaved 2 of 5 minimum length limit,then scan the appendix

data and edit the 1, 4 in the bar code, save.

Scan configuration code Interleaved 2 of 5 maximum length limit,then scan the appendix

data and edit the 1, 4 in the bar code, save,the configuration is completed.

Example 2.3：Configure Code 39 barcode length to any length supported.

Scan configuration code Code 39 minimum length limit,then scan the appendix data and

edit the 0 in the bar code, save,

Scan configuration code Code 39 maximum length limit,then scan the appendix data and