User Manual

24
Reset to default configuration
2.6 Prefix and suffix setting
2.6.1 Prefix and suffix setting
You can set at most one prefix and two suffix attach to the scan data. To set this prefix
and suffix, you need to scan four number (means four barcode in Appendix II and II) based
on ASCII. If you want to change or cancel one incorrect setting, scan the “cancel setting” in
the appendix.
Remark: If you want to set prefix and suffix, you must scan the barcode below to set the
content of prefix and suffix first.
2.6.2 compound mode setting
Scan the barcode below to set the compound mode you want.
retard of characters
（
default 0ms
）
Prefix 1
Suffix 1
Suffix 1
delete prefix and suffix
Null prefix and suffix
Barcode + suffix 1