User Manual

23
Reset to default configuration
Choose MARK as Odd-even check bit and Odd-even check digital always is “1”.
Choose SPACE as Odd-even check bit and Odd-even check digital always is “0”.
If you don’t need Odd-even check bit, choose null.
2.5.3 stop bit setting
Every character has a stop bit in the end during the data transmission which means the end of
transmission of this character. To set the stop bit (one or two) based on the requirement of your host.
2.5.4 The retard of characters
The retard of characters can give host time to serve the receiver and execute other tasks
between characters. To set the retard of characters must match the requirements of the host.
The retarded time is in the rank of 0ms to 99ms, the smallest unit is 1ms. If you want to set
the retarded time, scan the below barcode first, then scan two numbers as the retarded time.
For example, you want to set 5ms as retarded time, scan the barcode below then scan“0” “5”
at the appendix. If you want to change or cancel one incorrect setting, scan the “cancel
setting” in the appendix.
Even digital
SPACE
Null odd-even check bit
One stop bit
Two stop bit
Mark