User Guide

4
it's up to the database software you are using to interpret what that string of
characters means.
Once you acquire the barcodes, you have to correlate them to something
more meaningful by either purchasing a software service that will interpret
the barcode and relate it to a product, or you can use your own internal
inventory system to assign the barcodes to specific products.
After that,when you enter the barcode into the software by the
scanner,your software will look up the barcode and then output the related
information of your product.
2. Why can the scanner not read the barcodes?
There are some reason for that
Maybe the scanner failed to match the receiver .
Maybe the scanner was set to storage mode or USB virtual com.
Please follow the reset steps on page 2-3 to set up the scanner
The other possible reason is that the setting is off by default, for some
barcode types are not commonly used. You need to activate a specific
barcode type to get it to work . Please feel free to contact our Customer
Service Team for further assistance.
3. Why does scanner not read the barcode exactly. When I use the
scanner to read a barcode of an item, I get a different result from the
barcode itself. For example,We use Code 39. it puts an * at the beginning
and a * at the end. How do we program the scanner to read whole