In order to correctly use the barcode scanner, please carefully read the instruction and keep properly to look up. If you have any question about the scanner,please contact us at nadamoo@126.com Package Include: 1 X Blue USB Receiver (For receiving the barcode data ) 1 X Black USB Cable (Only for charging ) 1 X Scanner 1 X Code Card 1 X Manual Charging Please ensure that the scanner has enough power.
Charging tips Micro-current charging: Within 1-10 minutes of this phase, the indicator light may has no reaction, after about 10 mins,the red light flashes Normal charging Blue light is on with the red light flashing Full charged Blue light is on and the red light goes out. Quick Guide： （The scanner has been paired with the receiver, and set up already） 1. Plug the blue USB receiver into your computer, 2. Open notepad or Microsoft Word ,put the cursor in the field 3.
Second step.scan the code below to pair the scanne with the receiver Match the receiver Third step.scan the code below to set the scanner to instantly upload the barcode Instant upload Mode fourth step,scan the code below to set the scanner as USB HID,the scanner will work like keyboard USB_HID Customer Q&A 1. If i scan a product barcode, will it include the name of the product in the file automatically? The computer sees the scanner like a keyboard.
it's up to the database software you are using to interpret what that string of characters means. Once you acquire the barcodes, you have to correlate them to something more meaningful by either purchasing a software service that will interpret the barcode and relate it to a product, or you can use your own internal inventory system to assign the barcodes to specific products.
barcode? The barcode the computer received is 123456789. The barcode we need is *123456789*. The scanner was set to read the check digit of each code and not read the extra start and stop characters of each barcode by default. Please send us a clear picture of the barcode and the result you get, our customer service will help you to solve the problem. Buzzer and LED tips 1\Battery level indication (1) Turning the scanner on,when the buzzer rang "DI DI DI" and the blue light is on with no red light flashing
In Storage Mode (1) The blue light flashes and the buzzer rang a fast "DI-en" when the barcode is saved successfully in the built-in memory of the scanner (2)The red light flashes and the buzzer rang a slow "DI---en" when the barcode can not be saved in the built-in memory of the scanner.This indicates that there was not enough memory to save the bar code. Please upload the saved barcode by scanning the code "Upload Data" and then clear the saved barcode by scanning code "zero clearing". 3\ Tips during matc
Specification Frequency： 433MHZ Charging supply：5V-500mA Distance：Indoor Working current：15-40mA 100m Outdoor storage：100000 400m Standby current ：18uA-5mA- barcode Working time：7 to 10 days Scanner parameters: Scanning type ：bi-directional Light source：650nm LD CPU：ARM 32-bit Cortex Trigger Mode：Button,Continuous Printing Contract ：>25% Indication：Buzzer & LED Depth of Field 3.3mil 2mm-100m Resolution ：3.3mil 10mil 2mm-350m Scanning width ：30cm 15.
General Settings 1 .Restore factory setting To Restore factory settings,scan the following barcode Restore defaults （Restore factory settings） 2.
3.Two upload mode ►Instant upload mode—Instantly upload data to the document you have opened. **To set the scanner to instant upload mode,scan the following barcode Instant upload Mode ►Storage mode—Scan and store barcode inside the scanner, and uploaded the data to your device when you need it .
**Scan the following barcode to clear stored bar code Zero clearing **Scan one of the following barcode to select data upload speed Upload speed-fast(default) Upload speed-slow 4.Two scanning mode ►Key trigger mode: press the buttom to read barcode .The laser appeared and then went out **To set the scanner to Key trigger mode,scan the following barcode Keys Trigger (default) ►Continuous scaning mode : read barcode withour pressing the buttom. The laser is always on.
5.Duplicate read settings Scan one of the following barcode to select barcode detection mode Duplicate barcode detection-ON (Unable to upload duplicate barcode) Duplicate barcode detection-OFF (Able to upload duplicate barcode) 5.Sleep time settings **Scan one of the following barcode to set the time interval,when it's idle exceeding the time interval you set,the scanner will enter into Standby mode.
**Scan one of the following barcode to set the time interval,when it's idle exceeding the time interval you set,the scanner will switch off. 10s Automatic Switch off 30s Automatic Switch off 5mins Automatic Switch off 15mins Automatic Switch off 7.
8.Interface setup Scanning the corresponding bar code to choose the interface. USB_HID (default) USB virtual COM 9.Terminator Editting Add Carriage Return Add Disable suffix TAB To add Carriage Return, please read code “ Add Carriage Return” To disable Carriage Return,please read code “ Disable suffix ” To add TAB, please read code “ Add TAB” To disable TAB, please read these code orderly “Add Carriage Return ” “ Disable suffix ” Note: if you need other Terminator,please contact us.
10.Check digit setting Scanning the corresponding bar code to achieve the corresponding function Hide EAN8 Check Digit Show EAN8 Check Digit Hide EAN13 Check Digit Show EAN13 Check Digit Hide UPCA Check Digit Show UPCA Check Digit Hide UPCE Check Digit Show UPCE Check Digit Convert UPCE to UPCA Note: If you need to set the check digit of other barcode types ,please contact us.
11.
CANADIAN-FRENCH CROATIA FINLAND SWITZERLAND (FRENCH) CZECHOSLOVAKIA (CZECH) PORTUGAL SWITZERLAND (GERMAN) CZECHOSLOVAKIA (SLOVAK) NORWAY POLAND SWEDEN UNIVERSAL 16
