Owner's Manual

IDENTIFICATION OF CONTROLS

FRONT PANEL

9 7/8 , 9/0 , ENTER

• Press 0 to skip forward or 9 to skip backward a track, le or

chapter.

• Press 7/8 to scan fast-forward or fast-reverse during playback. Each

time the button is pressed, the speed increases until the maximum

level is reached. The scanning speed is indicated by trailing icons “3” or

“4” as shown in the OSD and may vary by disc type.

• The speed will be retained even after the button is released; press

[PLAY/PAUSE] to resume normal playback.

The front panel 9/0, 7/8 and ENTER buttons respectively

simulate the same functions of the A/S/D/F and ENTER buttons of the

BR 2 remote control under the following conditions or options only

• Navigating through the HOME menu and SETUP menu.

• Browsing DivX or PHOTO les on a disc or USB device.

Outside of the above conditions, the 9/0 and 7/8 buttons

normally function as SKIP and SCAN modes.

NOTE

Not all media support maximum speeds for scanning.

10 USB INPUT

• Connect an external USB device into this input.

• Refer also to the “USB MODE” section of “USING THE T 567 –

FEATURES” under the “OPERATION” main heading.

ENGLISHPORTUGUÊS FRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ