NR1520 OWNERS MANUAL ATTENTION! DO NOT USE THE MACHINE WITHOUT HAVING READ THE INSTRUCTIONS CAREFULLY NaceCare Solutions 1205 Britannia rd E. Mississauga, ON, Canada L4W 1C7 Tel: 1 800 387 3210 Fax: 1 800 709 2896 Visit us on the web: www.nacecare.
ASSEMBLY INSTRUCTIONS ASSEMBLY OF HANDLE (NR1520) Put the handle in vertical position, place its support on the four holes and insert all the four bolts (M8). Tighten the bolts one at the time, using a wrench to hold the lock nuts in place. Connect the shock to the support. Connect the handle cable with the motor cable.
SUMMARY SUMMARY .........................................................................................................................3 UPON DELIVERY OF THE MACHINE ....................................................................................4 TECHNICAL DATA ..............................................................................................................5 MACHINE PREPARATION ...................................................................................................
Upon delivery of the machine When the machine is received, ensure to check that all components are in the box and that the machine has not been damaged in transport. This machine has been designed for use on hard floors. Any use of the machine, other than the recommended use is dangerous and could cause injury to the operator. The machine is suitable for the use of all sites, i.e. hotels, schools hospitals, factories, shops, offices, residences.
TECHNICAL DATA NR1520 Unit Washing width INCH 21.25” Machine length INCH 24” Machine height (motor) INCH 11.
MACHINE PREPARATION PREPARING THE MACHINE FOR FIRST USE Upon delivery of the machine, please ensure that the owner’s manual is read thoroughly. If there is multiple users for the machine, ensure that they have a full understanding of how to use the machine in a safe manner. ABRASIVE PAD DRIVER ASSEMBLY WARNING: When installing the pad driver/brush by hand, ensure that the power source is disconnected. Installing the pad driver/brush with the machine plugged in could cause serious injury.
MACHINE PREPARATION WARNING: Use only high-speed pads. Using any other pads other than ones recommended for high speed could be dangerous and cause bodily harm or damage to the floor.
GENERAL SAFETY RULES Any use of the machine other than the specified uses different from the instructions written here or recommended by NaceCare Solutions is prohibited and could cause bodily harm. Do not remove or replace the specification plates on the machine for any reason. Before operating the machine or performing maintenance, READ THESE INSTRUCTIONS CAREFULLY. The use of the machine in closed surroundings is subordinated to rules effective in your country.
WORK PREPARATION MANOEUVRE OF THE MACHINE PREPARATION:MANOEUVERING THE MACHINE By pulling the lever (A) lower the handle until the arms of the user are lightly bent. Using your thumb, push down on the safety lever (B) and then engage the motor with the two levers (C). The safety lever (A) must be pressed down every time before starting. For safety reasons, the motor cannot be operated when the handle is in the upright position.
UPON COMPLETION OF WORK DISASSEMBLY OF BRUSH/PAD DRIVER To remove the abrasive pad, Lay the machine on the floor so it is resting on the handle. With the appropriate handle unscrew (counter clockwise rotation) the lock nut, Remove the abrasive pad from the flange. Insert the lock nut after the pad is removed. Return the machine back to it’s upright position. During storage, the machine must never rest on the pad. The machine weight could permanently damage it.
TROUBLE SHOOTING GUIDE THE MACHINE DOES NOT CLEAN EFFICIENTLY (IT FLUTTERS OR SWINGS) If the machine has been stored in the upright position with the pad on it, the pad may have been deformed by the weight of the machine. Replace the pad/brush to correct this problem. THE MACHINE STOPS WHILE WORKING Check that the circuit breaker on the rear of the handle has not tripped. If the circuit breaker trips repeatedly, contact you nearest NaceCare Solutions service centre.
