Owner manual

Wide Area Vacuum
6
Control panel
The machine has a unique motor control system
to help you as an operator and to help services
and repairs.
The control panel.
1. Power Supply Indicator
2. Infra-red port with a special terminal to read
information. Number of hours in operation.
Number of times activated. Number of times
overheated because of blockages. Reset or
reprogram the zones green, yellow and red.
The three indicators on the panel
3. Green Brush pressure okay
Height is ok
4. Yellow Brush pressure too low
Adjust the height
5. Red brush pressure too high
Adjust the height
Height Adjustment
Green-Light Optimal performance
Yellow-Light Push handle down
Red-Light Pull handle up
When the brush roll is blocked the red light starts
blinking. Loosen the handle to stop the blinking.
345
2
1
Let’s make things easy for you and us.