Manual
3
SETUP
This machine is designed to clean large areas of carpet. For normal operation, the machine drives
forward, cleaning a path of 20 inches of carpet (see Using as a Self-propelled Machine
).
It can also be used to clean small areas of carpet, with an additional hose and floor wand (see Using
with Accessories
)
The following steps explain how to prepare the machine for use:
1. Fill in the lower tank (solution tank) with cold or warm water, through the filling hole, adding
chemical according to the manufacturer’s specifications.
Attention: wool carpet must be washed with cold water only!
2. Plug the power cord into the wall outlet (see Safety Regulations
).