User Manual

SPCOM00000050
1
SPCOM00000050
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
ENGLISH
INSTRUCTIONS FOR REPLACING THE SPCOM00000050
1. Remove the N-Com system from the helmet (see instruction booklet).
2. Remove the plastic clip and remove the keyboard (Fig. 1-2).
3. If necessary, before you apply the new keyboard, remove the bi-adhesive found on the plastic
coupling clip.
4. Apply the new keyboard and reposition the plastic coupling clip (Fig. 3-5).
5. Reposition the N-Com system inside the helmet (see instruction booklet).
-----------------------------------------------------------------
ISTRUZIONI PER LA SOSTITUZIONE DEL RICAMBIO SPCOM00000050
1. Rimuovere il sistema N-Com dal casco (vedi libretto di istruzioni).
2. Rimuovere la clip plastica e rimuovere la tastiera (Fig. 1-2).
3. Se necessario, prima di applicare la nuova tastiera, rimuovere il biadesivo presente sulla clip plastica
di aggancio.
4. Applicare la nuova tastiera e riposizionare la clip plastica di aggancio (Fig. 3-5).
5. Riposizionare il sistema N-Com all’interno del casco (vedi libretto di istruzioni).
-----------------------------------------------------------------

Summary of content (2 pages)