Installation & Assembly

2
3
Lay myWall panels face down on a clean floor.
Place both top and bottom sections next to each
other. Top section has the cut-outs for the french
cleat mounting at the top. The bottom panel has a
lower open section at the bottom.
(2 wooden blocks and 8 furniture screws are
provided with each of your myWall panel sets)
(Keep each box set together as a unit, don’t mix
panel sets between boxes)
Attach connector blocks to fasten top and
bottom of your myWall panel together.
(Easiest to place both top and bottom panels
face down on floor, slide the top and bottom
sections together and then attach 2 wood
connector blocks)