UF-7 Universal Hobby Lighting Controller Installation Instructions for FW1.05 Please read instructions completely before attaching LEDs to RC.
Contents LED INSTALLATION ............................................................ 3 POWER CONNECTIONS & SETTINGS .............................. 4 LEDs LEGEND ..................................................................... 4 BLINK MODES ..................................................................... 5 MODE 0 All OFF ............................................................... 5 MODE 1 All ON ................................................................. 5 MODE 2 Off Road .........
LED INSTALLATION 1. Choose where to install, what size, and what color LEDs are to be used. Next, choose the desired UF-7 blink MODE (See Blink Mode Section page 5). NOTE – The blink MODE indicates where to plug each LED into the UF-7 controller. 2. Drill Holes for LED Holders. Be careful to not drill the hole too large. NOTE - You can purchase a hand drill from your local RC hobby store. Follow carefully all safety instructions provided with the drill. 3. 3 Snap LED Holders into Holes. 4.
POWER CONNECTIONS & SETTINGS Power Pass thru for roof flashers or other accessories. NOTE: This is a power OUTPUT not an input. DO NOT connect to a battery. 9V Power Option – To power the UF-7 using a 9V battery, plug the 9V Adapter cable into either connector 1 or 2 as shown. If the power LED does not blink or turn on steady, press the MODE button one time. NOTE: MODE #0 (ALL OFF) does still draw a small amount to power.
BLINK MODES MODE 0 All OFF All LEDs OFF (Power LED on UF-7 OFF) OFF OFF OFF OFF PORT 1 or 2 AUXILIARY POWER OUT OFF OFF OFF OFF OFF OFF Connect to Vehicle Radio (Motor Channel) OFF PORT 1 or 2 Connect to Motor AUXILIARY POWER OUT OFF OFF OFF MODE 1 All ON Connections for All LEDs ON (LEDs on steady at full brightness) ON ON ON ON PORT 1 or 2 AUXILIARY POWER OUT ON ON ON ON Connect to Vehicle Radio (Motor Channel) ON ON ON PORT 1 or 2 Connect to Motor AUXILIARY POWER OUT ON ON ON Up
Connections for 10 HEADLIGHTS and 2 TAIL/BRAKE LIGHTS Connect to Vehicle Radio (Motor Channel) HDLT TLLT HDLT ON ON ON ON PORT 1 AUXILIARY POWER OUT Connect to Motor ON HDLT ON HDLT ON HDLT Up to 8 BODY STROBES 2 TAIL/BRAKE LIGHTS switchable ROOF FLASHER MODE 3 Emergency Connections for STROBES only (This connection has no headlights, tail/brake lights, or switched emergency lights) STRL A TLLT STRL B ON OFF ON ROOF FLASHER BAR ON PORT 1 or 2 AUXILIARY POWER OUT ON STRL B OFF ON
MODE 4 Emergency Up to 8 BODY STROBES 2 HEADLIGHTS 2 TAIL/BRAKE LIGHTS switchable ROOF FLASHER (with headlights) Connections for STROBES with HEADLIGHTS and TAIL LIGHTS (This connection has no switched emergency lights) STRL A ON TAIL STRL B ON ON ROOF FLASHER BAR ON PORT 1 or 2 AUXILIARY POWER OUT ON ON ON STRL B HDLT STRL A Connections for STROBES with HEADLIGHTS and TAIL/BRAKE LIGHTS (This connection has no switched emergency lights) STRL A TLLT STRL B ON Connect to Vehicle Radio (Motor
Random flash all LEDs, great for drifting or emergency vehicles ON Connect to Vehicle Radio (Motor Channel) ON ON ON PORT 1 AUXILIARY POWER OUT Connect to Motor MODE 6 Car ON ON ON Up to 4 HEADLIGHTS 2 TAIL/BRAKE LIGHTS 2 REVERSE LIGHTS 4 TURN SIGNALS (Turn signals normally OFF) Connections for HEADLIGHTS and TAIL LIGHTS (This connection has no brake lights, turn signals, or reverse lights) REVL TAIL TRNL OFF ON OFF ROOF FLASHER BAR ON PORT 1 or 2 AUXILIARY POWER OUT ON HDLT ON OFF
MODE 7 Car Up to 4 HEADLIGHTS 2 TAIL/BRAKE LIGHTS 2 REVERSE LIGHTS 4 TURN SIGNALS (Turn signals normally ON) Connections for HEADLIGHTS and TAIL LIGHTS (This connection has no brake lights, turn signals, or reverse lights) REVL TAIL TRNL ON DIM OFF ON DIM ON PORT 1 or 2 AUXILIARY POWER OUT ON HDLT ON DIM HDLT TRNL ON DIM Connections for HEADLIGHTS, TAIL/BRAKE LIGHTS, TURN SIGNALS, and REVERSE LIGHTS FOR BRAKE and REVERSE LIGHT FUNCTION Connect to Vehicle Radio dio (Motor Channel) el) Conne
Connections for HEADLIGHTS and TAIL LIGHTS Window LED Strip TAIL ON Connect to Vehicle Radio (Motor Channel) BRKL TAIL ON ON ON PORT 1 AUXILIARY POWER OUT Connect to Motor ON HDLT MODE 9 Aircraft ON HDLT ON HDLT 2 WING NAV LIGHTS 2 WING STROBES 2 FUSELAGE STROBES 2 LANDING LIGHTS 2 GUN LEDs 2 AUXILIARY LIGHTS (Landing lights normally ON) Connections for STROBES, NAVIGATION LIGHTS, and LANDING LIGHTS (This connection has no gun LEDs and landing lights cannot be turned off) FOR BASIC AIRCRAF
Connections for STROBES, NAVIGATION LIGHTS, switched LANDING LIGHTS and GUNS (This connection allows gun LEDs and landing lights to be turned on/off from transmitter) FOR SWITCHABLE LANDING LIGHT FUNCTION Switchable GUNs normally OFF can be switched ON with transmitter Connect to Vehicle Radio dio (Landing Gear Channel or el) switched AUX Channel) PORT 2 Landing Gear Servo or no connect AUX FSLR ON ON GUN ON ON FOR ON/OFF SWITCHABLE GUN LEDs Connect to Vehicle Radio o (AUX Channel) l) AUXILIARY
Connections for STROBES, NAVIGATION LIGHTS, switched LANDING LIGHTS and GUNS (This connection allows gun LEDs and landing lights to be turned on/off from transmitter) FOR SWITCHABLE LANDING LIGHT FUNCTION Switchable GUNs normally OFF can be switched ON with transmitter dio Connect to Vehicle Radio (Landing Gear Channel or el) switched AUX Channel) PORT 2 Landing Gear Servo or no connect AUX FSLR ON ON GUN ON OFF FOR ON/OFF SWITCHABLE GUN LEDs Connect to Vehicle Radio o (AUX Channel) l) AUXILIARY
