User manual

SPHINX Myth 1
7
Connecting the optical cables
The Myth 1 has two CONTROL OUT optical
connectors so it can remotely switch other Sphinx
components to stand-by.
When the CONTROL IN of a component is
connected to the CONTROL OUT of the Myth 1 with
an optical cable, you do not have to use that
component's ON/OFF switch. As soon as the Myth
1 is selected to stand-by the other component is
also selected to stand-by.
CONTROL OUT: These outputs are activated as
soon as the Myth 1 is switched on.
Ensure proper connection of the optical cables
(from CONTROL OUT to CONTROL IN), otherwise
the LED next to the m STANDBY button (11) on the
front panel will not light although the stand-by mode
is activated.