User manual

SPHINX Myth 1
5
Rear panel
1. TUNER: To connect the signal cable from the
tuner.
2. CD: To connect the signal cable from the CD
player.
3. TAPE OUT: Connect this output to the input of
the recorder.
4. TAPE IN: Connect this input to the output of the
recorder.
5. LINE 4: To connect the signal cable from the
signal source for LINE 4.
6. LINE 3: To connect the signal cable from the
signal source for LINE 3.
7. LINE 2: To connect the signal cable from the
signal source for LINE 2.
8. LINE 1: To connect the signal cable from the
signal source for LINE 1.
9. VIDEO: To connect the signal cable from the
audio output of the video source.
10. Control Out: To connect the optical cable(s) to
other Sphinx component(s).
11. OUT 1 and 2 L+R: Connect this output with a
signal cable to the input of your power amp.
12. Manufacturer’s label: This shows important
data for the component, such as serial number
and mains power voltage.
13. Warning!: This shows important information
about the safety regulations for the Myth 1.
14. AC Power: Connect the mains cable to a mains
power outlet (100 - 240 VAC).
The mains fuse is placed behind the cover.
1
2
3
4
5
6
7
8
9
1
0
1
1
1
2
1
3
1
4