User manual

SPHINX Myth 1

7. CARE AND MAINTENANCE

Clean the exterior with a soft, lint-free, anti-static

cloth. Do not use force while wiping the surface.

To remove difficult stains use a few drops of

detergent on a moist cloth, sweep carefully and

wipe dry afterwards.

If some scratching occurs, please consult your

Sphinx dealer first. He can give you advice about

possible solutions.

Do not use polishing or cleaning agents: they

may damage the sensitive acrylic finish.

Do not use aerosol cleaning agents.

Most contain solvents which might actively react

with and damage the acrylic finish.

8. TECHNICAL SPECIFICATIONS

Bandwidth 0 - 111,000 Hz (+0/-3 dB)

Phase response error <2° ( from 0 - 20,000 Hz )

Gain 9.5 dB max. 3 times.

THD+N (IHF-A) <0.020% / 0.002% (IHF-A) (2

harm., 10 - 20,000 Hz)

IMD <0.003%

S/N ratio (IHF-A) >84dB / 100 dB (IHF-A)

Channel separation >98 dB

Inputs 8x cinch (gold-plated)

Level, nominal (for 1 V output) 0.13 V (-18 dBV)

impedance

74 kΩ

Outputs 2x cinch Out 1, Out 2 (gold-plated)

1x cinch Tape (gold-plated)

level 10.5 V max. (20.42 dBV) (1 - 100,000 Hz, THD <0.002%)

impedance

<10 Ω

Volume control ALPS motorised

channel imbalance less than 2 dB

Sphinx Control 2x optical out

Remote control Full function

Power supply External, completely stabilized

Supply capacitance 16,280 µF total

Power consumption 11 W (9 W stand-by)

Dimensions (h x w x d) 75 x 434 x 350 mm

Weight 7 kg

This unit conforms to the EMC interference regulations issued by the EU and to the CE standards.

This unit complies with safety regulation VDE 0860 and therefore with international safety regulation IEC 65.

Technical specifications may be changed by SPHINX without prior notice if technical developments make this

necessary.