User manual

myth Preamplifier user manual
myth www.myth.rs
12 / page
6.3. To set volume level using the Remote controller
- Using buttons "Volume Down" and "Volume Up" on the remote
controller it is possible to change volume level of the output.
If the "Volume Down" button is pressed the volume decreases down to
zero in steps of one.
If the "Volume Up" is pressed the volume increases up to 99 in steps
of one.
6.4. To invoke Mute and Unmute functions using Remote Controller
Pressing the "Mute" button on the remote controller causes the Myth
Preamplifier to completely silent the output signal.
Pressing the "Mute" button again while the device is muted invokes the
Unmute function, causing the Myth Preamplifier to gradually increase the
volume level up to the level set before Mute was activated. During the
Unmute function no other operation is possible to execute.