User manual

8X96 ADC and DAC User Manual Page 51 of 54
for current literature, manuals and online email support check http://www.mytekdigital.com
Front end for AudioCube ®
Front end for other DAWs
Front end for Tascam MX-2424 ®
Front end for Mackie HDR2496 ®
Front end for Sony DMX—100R ® and other digital consoles
Front end for DAW
8X96 Converters are one of the most flexible choices for a high performance hardware
front end. Mytek focuses exclusively on the performance of the converters and therefore
can offer a solution superior to any offered by a DAW manufacturer. A choice of
Daughter Interface cards allows for direct interfacing with several popular DAW’s:
Native Nuendo systems and Sonic Solutions HDSP ™. 8X96 Converters interface well
with a number of other digital IO interfaces such as RME Hammerfall, Lynx AES16,
MOTU and many cards from Digital Audio Labs, Frontier Design, Event Electronics, etc.
8X96 Converters support nearly all physical and data formats as long as the particular
software/DIO-card supports them.
8X96 provides a DAW with following features:
1. Superior multichannel 16,20, or 24 bit digital audio conversion with sampling rates
up to 100kHz. Channels I/O can be stacked in increments of 8 to an unlimited
number.
2. Digital format conversion between a large number of digital formats.
3. Direct connection to selected DIO cards without a need for native hardware.
4. Stable (jitter of <10ps) clock system.
5. External wordclock synchronization.
6. Interfacing and format conversion with all available bit splitting algorithms for high
resolution editing and mastering- MRX™, and S/MUX ™ are supported.
Mytek, in cooperation with Sonorus, Inc. has also developed its own high performance,
cost effective multichannel DAW hardware solution called DAW9624™ described in the
next chapter.