User manual

Mytek Stereo 192-DSD Digital to Analog Converter – User Manual

Rear Panel

A – IEC Power socket and fuse – Standard 115/230V

receptacle. (100V for Japanese Models)

B – S/PDIF Coax Input – Consumer digital input that accepts

up to 192KHz sampling rate.

C – FireWire 400 Port – 6-pin computer interface. Can be used

with FireWire 400 > FireWire 800 cable. 192KHz/DSD capable.

D – USB 2.0 Port – Female USB B-type port for hi-speed

(480Mbps) computer interface. 192KHz/DSD capable.

E – USB 1.1 Port – Female USB B-type port for full speed (12

Mbps) computer interface. 96KHz capable.

F – Wordclock BNC Input and Output – Used for professional

clock distribution. 192KHz capable.

G – S/PDIF Optical Input (Toslink) – Consumer digital input

that accepts up to 96KHz. Can also accept professional ADAT

signal up to 96KHz.

H – AES/EBU Input – Professional digital input that accepts

up to 192KHz.

I – Unbalanced RCA Stereo Analog Input (Pre version only)

J – Unbalanced RCA Stereo Analog Output

K – Balanced XLR Stereo Analog Output