User manual

ManualsBrandsMyTek ManualsMedia ConverterStereo 192 ADC

Mytek Stereo 192-DSD Digital to Analog Converter – User Manual

Specifications

–

Conversion: 32bit, PCM up to 192k, 64xDSD, 128xDSD.

–

Dynamic Range: 128dB (ESS Sabre chipset in 8 mono to 2

stereo config.) THD DAC: -110dB.

–

Digital Audio Inputs: SPDIF, AES/EBU, Toslink all up to

192k single wire. (64xDSD and 128XDSD SDIF DSD

interface on Mastering Version.)

–

Clock: Internal Clock Generator (10ps jitter,) Wordclock In

and Out, or sync to incoming digital audio input with

low jitter JET (tm) PLL.

–

Internal Async Hardware Upsampling- 16bit 44.1k etc. can

be optionally upsampled prior to conversion to

192k/24bit with clock jitter eliminated.

–

Transparent, 1dB stepped programmable analog

attenuator, separate for main out and headphones.

–

Relay bypass of the attenuator for direct purist DAC out.

–

A pair of unbalanced RCA analog ins for preamp

functions (assignable to volume control) (In Preamp

Version.)

–

High Current, High Slew Rate ultra low distortion 500mA

hi-fi headphone amp.

–

Worldwide user switchable linear power supply.

–

Online downloadable firmware updates.

–

Ability of converting standard digital audio inputs into

computer FW/USB input.

–

Optional infrared remote (avail 2012).

–

Enclosure: Compact portable 1/2 rack space

1.72in H x 8.5in W x 8.5in D.

–

Weight 6 lbs.

User Menu Choices:

–

Functions assignable to buttons: MUTE, PHASE INVERT,

MONO, (L-R), M/S, DIM

–

Selection of clock choices

–

Choice of upsampling or not

–

Selection of slow or fast/steep filter for PCM

–

Selection of 3 filters for out of band DSD

–

Assignable input selection (display only active)

–

Dimmable intensity of display/led meter