User manual

Mytek Stereo 192-DSD Digital to Analog Converter – User Manual

Remote Control Setup

The Mytek Stereo192-DSD DAC is infrared remote ready and will

work with any Aluminum Apple Remote or any Universal

Remote Control using the "RC5 standard"

Stereo192-DSD DAC Apple Remote Setup

1) Press the Menu button

2) Rotate the knob until "Remote" is selected. Press the knob

to enter "Remote" menu

3) Rotate the knob until "Enable" is selected. Press the knob to

enter "Enable" menu

4) Rotate the knob until "On" is selected. Press the Menu

button to turn on Remote Control.

5) Rotate the knob until the “Mode” is selected. Press the

knob to enter “Mode” menu.

6) Rotate the knob until “Apple” is selected. Press the knob to

to enter “Address Set” at this point aim the Aluminum

Apple Remote at the Stereo192-DSD DAC and press the

Silver button at the center of the circle on the Apple

Remote.

7) Success the Apple Remote is Paired!

Stereo192-DSD DAC RC 5 Remote Setup

1) Press the Menu button

2) Rotate the knob until "Remote" is selected. Press the knob

to enter "Remote" menu

3) Rotate the knob until "Enable" is selected. Press the knob to

enter "Enable" menu

4) Rotate the knob until "On" is selected. Press the Menu

button to turn on Remote Control.

5) Rotate the knob until "Mode" is selected. Press the knob to

enter "Mode" menu

6) Rotate the knob until "RC 5" is selected. Press the knob to

enter "RC 5" menu

7) Rotate the knob to select your remote's proper channel,

either 00, 16 or 20. Press the Menu button to set the

Address channel.