User manual

Mytek Stereo 192-DSD Digital to Analog Converter – User Manual

DRIVER INSTALLATION

USB 1.1 PC and MAC

1. Connect the Analog Outputs to your powered

speakers/amplifier. Balanced connections (XLR) are typically

for professional audio equipment while unbalanced

connections (RCA) are typically for consumer audio

equipment.

2. Connect the unit to your computer using USB1.1.

3. Turn on both the computer and the converter, then your

speakers/amplifier.

4. By default the unit will be set to USB1.1 input. You will

now have to set the unit as the default playback device in

your operating system's sound properties.

USB 1.1 is a simple plug-

n-play solution that

requires no drivers. The

benefit is that you can

very quickly and easily

set up the unit for

computer playback. The

drawback is that you are

limited to 96kHz as the

maximum sampling rate.

Using USB 2.0 or

FireWire will allow you

to playback all sample

rates up to 192kHz and

DSD. These setups are

explained in subsequent

chapters.