User manual

Mytek Stereo 192-DSD Digital to Analog Converter – User Manual

Remote Control Setup

The Mytek Stereo192-DSD DAC is infrared remote ready and will

work with any Universal Remote Control using the "RC5

standard"

Stereo192-DSD DAC Remote Setup

1) Press the Menu button

2) Rotate the knob until "Remote" is selected. Press the knob

to enter "Remote" menu

3) Rotate the knob until "Enable" is selected. Press the knob to

enter "Enable" menu

4) Rotate the knob until "On" is selected. Press the Menu

button to turn on Remote Control.

5) Rotate the knob until "Address" is selected. Press the knob

to enter "Address" menu

6) Rotate the knob to select your remotes proper channel,

either 00, 16 or 20. Press the Menu button to set the

Address channel.

7) Exit the all menus by pressing the Menu button until

volume and samplerate are visible, this will reactivate the

volume knob.

Remote Overview

The Mytek Stereo192-dsd-dac can opearate as

1. TV - address – 00

2. Preamp - address – 16

3. CD - address – 20

In each of these options the remote's volume up and volume

down buttons correspond to

turning the Stereo192-DSD DAC's Main knob