User manual

Mytek Stereo 192-DSD Digital to Analog Converter – User Manual

Function Buttons

The two buttons, FN1 and FN2, are user programmable

switches. Each button's function is set by choosing it in the

menu. The following options are available:

Input – This will bring up the input selection menu.

Mute – Mutes the audio.

Phase – Inverts the signals phase.

Mono – Sums left and right to mono.

L-R – Subtracts one channel from the other, canceling out

mono information while leaving the stereo information.

Mid Side – A combination of Mono (L+R) and L-R, the mid

signal is the sum of L and R (mono) and the side signal is the

stereo information from the L-R operation.

Dim Vol – Instantly lowers the level by 20dB.

Display

There are several choices pertaining to the display.

Brightness – Of the LED display.

Meters – Turns the signal level meters on or off. (Available

on black panel versions only.)

Auto-Off – This will turn the display off after the selected

amount of time. A dim dot will stay lit to show that the unit

is operational.

Remote

Enable – On and Off. Allows the Stereo192-DSD DAC to be

controlled by a Universal Remote control

Address – Choose the channel compatible with your

Universal Remote

Firmware

This will restore all of the unit's parameters to the factory

default. It will also show you your unit's current firmware

version.