Owner`s manual

SS-900 Rev. A OWNER’S MANUAL

MYTEK AMERICA 

For PERMANENT SIREN CHIRP ENABLE:

1. With your vehicle key in the key cylinder, turn it to ignition on position (Driving Position).

2. Within five (5) seconds, PRESS AND HOLD THE TRANSMITTER BUTTON #2 for a five (5) seconds.

3. Siren chirp enable is confirmed with two chirp sounds and two parking light flashes.

4.3 One Time Soft Chirp

Arm/Disarm chirp can be temporarily softened from your remote the transmitter.

To use temporary chirp disable,

1. PRESS AND RELEASE THE TRANSMITTER BUTTON #2.

2. Press and release the transmitter button #1, #2 or #3 for desired function.

Example: To arm the system with soft chirp sound, press button #2 first. Then press button #1.

4.4 Shock Sensor Disable/Enable (Factory Default Setting: Shock Sensor Enable)

The Shock Sensor Disable means that the on-board body shock sensor can be eliminated through your the

transmitter at any time it is desired or necessary.

To program SHOCK SENSOR DISABLE:

1. With your vehicle key in the key cylinder, turn it to ignition on position (Driving Position).

2. Within five (5) seconds, PRESS AND HOLD THE TRANSMITTER BUTTON #3 for five (5) seconds.

3. The shock sensor disable is confirmed with one chirp sound and one parking light flash.

To program SHOCK SENSOR ENABLE:

1. With your vehicle key in the key cylinder, turn it to ignition position (Driving Position).

2. Within five (5) seconds, PRESS AND HOLD THE TRANSMITTER BUTTON #3 for five (5) seconds.

3. The shock sensor enable is confirmed with two chirp sounds and two parking light flashes.

4.5 Valet Mode

The Valet Mode means that all normal system functions are turned off. This feature is useful when valet parking,

refueling, or servicing your vehicle.

To activate the VALET MODE:

1. With your vehicle key in the key cylinder, turn it to ignition position (Driving Position).

2. Within five (5) seconds, PRESS AND RELEASE THE PROGRAM SWITCH BUTTON two (2) times. The

program switch is located on the antenna.

3. Within five (5) seconds, PRESS AND HOLD THE TRANSMITTER BUTTON #1 for five (5) seconds.

4. The valet mode is confirmed with one chirp sound and one parking light flash.

To deactivate the VALET MODE:

1. With your vehicle key in the key cylinder, turn it to ignition position (Driving Position).

2. Within five (5) seconds, PRESS AND RELEASE THE PROGRAM SWITCH BUTTON two (2) times. The

program switch is located on the antenna.

3. Within five (5) seconds, PRESS AND HOLD THE TRANSMITTER BUTTON #1 for five (5) seconds.

4. The operation is confirmed with two chirp sounds and two parking light flashes.

Press #3

for 5 seconds

1 Chirp (Disable)

2 Chirps (Enable)

1 Light Flash (Disable)

2 Light Flashes (Enable)

Turn Ignition