Owner`s manual
SS-900 Rev. A OWNER’S MANUAL
3
MYTEK AMERICA
SECTION 1: GENERAL DESCRIPTION
Congratulations on your purchase of the SS-900, one of the best security starter systems using the most advanced
CMOS IC, EEPROM and SMT technology. SS-900 is the latest version of security starter system designed to
provide all essential preventative security measures with ease of operation.
The system is a two piece modular alarm and remote engine starter unit, which is easily operated by a small hand
held radio remote control, with a personalized factory code. The system has a unique multi-detector digital circuit
including an internal sensor which detects car body impact and glass break. Standard security features are:
Ø Defective Zone Bypass: If the system detects faulty sensor, it will respond with four chirps and four light
flashes when you arm.
Ø Dual-Stage Shock Sensor: The system includes a patented dual-stage shock sensor. It is designed to
warn a potential intruder on the first stage (5 short chirp sounds) when an illegal theft attempt or light impact
is made, and to instantly trigger the alarm on the second stage (50 second duration) if the thief attempts to
pry, wrench, jack, smash glass, impact the car body, or use forced entry through the doors, hood, or trunk.
Ø Emergency Disarm: If you lose your transmitter, you can disarm the system with the ignition key and the
program switch button.
Ø Flashing LED: The system warns and deters potential thief by the bright flashing LED.
Ø Personal Protection Alarm: You can trigger the system at any time by your remote in an emergency.
Ø Siren Chirp Delete: You can easily enable or disable siren chirps through ignition and the transmitter.
Ø Valet Mode: Valet mode means that all normal system functions are turned off. This feature is useful
when valet parking, refueling, or servicing your vehicle.
Ø Zone Diagnostic Report: If the system was triggered, it will report which zone was violated.
Your dealer can install the basic alarm with hardwire protection to the doors only, add the remote control engine
start system, or wire in any or all these options:
Ø Additional Sensors: Microwave space protection and other detection devices for various applications.
Ø Entry Illumination: Turning the interior lights on upon entry for safety and convenience. If the system is
triggered, interior lights flash together with the parking light.
Ø Hardwire Protection: Additional direct wired detection to sliding doors, hatches, or other openings such as
trunk and hood.
Ø Light Flash Signal: Car parking lights flash to verify the alarm status and function as an alarm signal when
detectors are activated.
Ø Pulsing Car Horn: Factory horn alarm signaling, alarm status and remote start verification instead of the
traditional electronic siren signal.
Ø Remote Engine Start: RF transmitter control of ignition on and engine start. Engine remains on for a
selected period of time to accommodate climate control, then automatically shuts down.
Ø Remote Keyless Entry: RF transmitter controls factory or after market electric door lock and unlock
actuators.
Ø Remote Trunk Release: RF transmitter operates factory or after market trunk release solenoid.
Ø Remote Window Roll Up or Down: RF transmitter operates factory or after market electric window(s) to
roll up or down.
Ø Starter Interrupt and Anti-Grind: Engine is immobilized and will not start when the system is armed. Also
eliminates grinding when the key is accidentally placed into the starting position when using optional remote
entry mode after starting a vehicle with a remote.
SECTION 2: SYSTEM MODE & OPERATION
MODE BUTTON CHIRP LIGHT LED DOOR
ARM (ON) #1 1 1 SLOW FLASH LOCK
DISARM (OFF) #1 2 2 OFF UNLOCK
ENGINE START #3 1 1 SLOW FLASH LOCK
ENGINE STOP #1 then #1 2 2 SLOW FLASH -
VALET ON IG ON, PRS 2 X, #1 for 5
seconds.
1 1 LONG-SHORT -
VALET OFF IG ON, PRS 2 X, #1 for 5
seconds.
2 2 NORMAL -
Emergency
Disarm
IG ON, PRS (KEY#1)
times, IG OFF-ON, PRS
2 2 OFF UNLOCK