User`s manual

MyTek MWA-105 Access Point
Communication Ltd.
Version: 1.1
1.3 Product Features
# Complies with IEEE 802.11b/g standard for 2.4GHz Wireless LAN.
# Supports multi-operation (bridge/WISP) modes between wireless and wired Ethernet interfaces
# Supports AP/Client/WDS/AP+WDS modes on wireless interfaces.
# Supports 64-bit and 128-bit WEP, WPA, WPA2 encryption/decryption function to protect the
wireless data transmission.
# Supports IEEE 802.1x Authentication.
# Support Wi-Fi Protected Access Authentication with Radius and Pre-Shared Key mode.
# Supports Inter-Access Point Protocol (IAPP).
# Supports Wireless Distribution System (WDS).
# Supports IEEE 802.3x full duplex flow control on 10/100M Ethernet interface.
# Supports DHCP server to provide clients auto IP addresses assignment.
# Supports DHCP client auto IP address assignment from ISP.
# Supports DHCP client for WAN interface in WISP mode auto IP address assignment from ISP.
# Supports PPPoE on WAN interface in WISP mode.
# Supports PPTP Client on WAN interface in WISP.
# Supports clone MAC address function.
# Supports WEB based management and configuration.
# Supports Log table and remote Log service.
# Support Setup Wizard mode.
MyTek Communication Ltd. Tel: [phone]
Vörösmarty utca 79. Budapest Fax: [phone]
Hungary H-1201 http://www.mytek.eu
2