User`s manual
MyTek MWA-105 Access Point
Communication Ltd.
Version: 1.1
Screen snapshot – WAN Interface Setup – Static IP
Item Description
Static IP Click to select Static IP support on WAN interface. There
are IP address, subnet mask and default gateway settings
need to be done.
IP Address If you select the Static IP support on WAN interface, fill
in the IP address for it.
Subnet Mask If you select the Static IP support on WAN interface, fill
in the subnet mask for it.
Default Gateway If you select the Static IP support on WAN interface, fill
in the default gateway for WAN interface out going data
packets.
MTU Size Fill in the mtu size of MTU Size. The default value is
1400
DNS 1 Fill in the IP address of Domain Name Server 1.
DNS 2 Fill in the IP address of Domain Name Server 2.
DNS 3 Fill in the IP address of Domain Name Server 3.
Clone MAC Address Fill in the MAC address that is the MAC address to be
cloned. Refer to 4.24 What is Clone MAC Address?
Enable Ping Access on
WAN
Click the checkbox to enable WAN ICMP response
Enable Web Server
Access on WAN
Click the checkbox to enable web configuration from
WAN side.
Enable IPsec pass
through on VPN
connection
Click the checkbox to enable IPSec packet pass through
Enable PPTP pass
through on VPN
connection
Click the checkbox to enable PPTP packet pass through
Enable L2TP pass
through on VPN
connection
Click the checkbox to enable L2TP packet pass through
Set TTL value Click to Enable and Set Time to Live value
Apply Changes Click the Apply Changes button to complete the new
MyTek Communication Ltd. Tel: (36-1) 347-0446, (36-1) 280-9397
Vörösmarty utca 79. Budapest Fax: (36-1) 347-0447
Hungary H-1201 http://www.mytek.eu
29