User`s manual

MyTek MWA-105 Access Point
Communication Ltd.
Version: 1.1
Set Security Click button to configure wireless security like
WEP(64bits), WEP(128bits), WPA(TKIP), WPA2(AES)
or None
Show Statistics It shows the TX, RX packets, rate statistics
Delete Selected Click to delete the selected clients that will be removed
from the wireless distribution system.
Delete All Click to delete all the registered APs from the wireless
distribution system allowed list.
Reset Click the Reset button to abort change and recover the
previous configuration setting.
I WDS Security Setup
Requirement: Set [Wireless]->[Basic Settings]->[Mode]->AP+WDS
This page is used to configure the wireless security between APs. Refer to 3.3.6
Wireless Security Setup.
Screen snapshot – WDS Security Setup
II WDS AP Table
This page is used to show WDS statistics
MyTek Communication Ltd. Tel: [phone]
Vörösmarty utca 79. Budapest Fax: [phone]
Hungary H-1201 http://www.mytek.eu
24