User`s manual

MyTek MWA-105 Access Point
Communication Ltd.
Version: 1.1
3.3.3 Operation Mode
This page is used to configure which mode wireless broadband router acts
Screen snapshot – Operation Mode
Item Description
Bridge Each interface (LAN, WAN and Wireless) regards as
bridge. NAT, Firewall and all router’s functions are not
supported
Wireless ISP Switch Wireless interface to WAN port and all Ethernet
ports in bridge mode. Wireless interface can do all
router’s functions
Apply Changes Click the Apply Changes button to complete the new
configuration setting.
Reset Click the Reset button to abort change and recover the
previous configuration setting.
3.3.4 Wireless - Basic Settings
This page is used to configure the parameters for wireless LAN clients that may connect to
your Access Point. Here you may change wireless encryption settings as well as wireless
network parameters.
MyTek Communication Ltd. Tel: [phone]
Vörösmarty utca 79. Budapest Fax: [phone]
Hungary H-1201 http://www.mytek.eu
14