Owner's Manual

8 Mytek Liberty DAC II
5.2 Rear Panel
1. Power Socket
2. S/PDIF Coaxial Input 1 and S/PDIF Coaxial Input 2. These are digital inputs which accept up to
192kHz/24bit. They also accept DSD DoP standard input up to DSD64.
3. Optical Input (TOSLINK). Accepts up to 192kHz/24bit and DSD DoP standard input up to DSD64.
For best results use short high quality TOSLINK cable. Special glass ber TOSLINK cable allows
for longer cable runs and is less jittery than regular plastic ber.
4. Mytek proprietary USB 2.0 Class 2, up to 32bit/384k, DSD256.
5. AES / EBU Digital Input
6. XLR Balanced Stereo Analog Output
7. RCA Stereo Analog Output
QUICK START
Immediate Playback SPDIF and TOSLINK
Connect the analog outputs to your powered speakers, power amplier or preamplier. Alternatively
you can also use headphones. Connect the digital source (CD player) to the DAC. Power up the player,
power amplier and the Liberty DAC II. Choose the input you would like to use by pressing input button..
Immediate Playback USB
The Liberty DAC II custom designed USB2 controller supports driverless operation on all operating
systems. It means that no extra drivers are required. Driverless operation basically means „plug
and play”. The Liberty DAC II will automatically show up on your computer’s list of supported
audio devices as „Liberty DAC II”. Simply choose that as your default audio playback device and the
system will work.
Attention! To prevent damage, do not turn on your speakers on until all
connections have been made.
Do not cover ventilation holes! It’s not recommended to stack
Liberty DAC II. It may result in overheating the device!