User manual

Specifications ADC*

Specifications DAC

Specifications Other

Conversion: Linear, 1 Bit *

128x oversampling at 44.1-48kHz

64x oversampling at 88.2-192kHz, optional 64xDSD and 128xDSD

Resolution: 24 bit, ( or 1 bit DSD)

Sample rates: 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz

or wordclock 25-200kHz

Dynamic Range: 120dB A-weighted, 117dB Total

THD+Noise: -106dB (<0.0005%)

Internal clock jitter: <10picoseconds

Analog Inputs: +4dBm balanced or unbalanced, 10 kOhm

Conversion: Linear, multibit delta-sigma

PCM and 64xDSD and 128xDSD

Resolution: 24 bit, ( or 1 bit DSD)

Sample rates: 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz

or wordclock 25-200kHz

Dynamic Range: 123dB A-weighted, 120dB Total

THD+Noise: -110dB (<0.0004%)

Internal clock jitter: <10picoseconds

Analog Outputs:+4dBm balanced or unbalanced, 75 Ohm

Digital outputs: Hi-Speed AES/EBU built in up to 200k or dual wire for 4 chan operation

Other formats on optional DIO Cards

External Sync.: Wordclock in and out.

or 256x Superclock

Wordlock Out

used as house clock: 15 LS TTL loads max. Can be terminated with 75 Ohm. 6 Outs

Wordlock In TTL/5V input- internally switchable termination 75 Ohm.

Wordclock can be replaced by Superclock fiunction

Mains: 100/115V-220/240V 50/60Hz switchable

Weight, Dim:: 14 pounds (7 kg), 1U x 19 inch x 10.5 inch deep

* This ADC uses a 1 bit delta sigma modulator which achieves instristically better low level

linearity than the multibit counterparts. Although multibit ADC THD measurements are marginally

better, the distribution of distortion subjectively sounds less desirable than in 1 bit converter which

tends to exhibit certain silky quality. The same, currently worlds' highest performance 1 bit

modulator is used to produce genuine 1 bit DSD signal.