Owner manual

Mytek Manhattan Digital to Analog Converter – User's Manual

Specifications

• Conversion: 32bit PCM up to 384k, DXD, DSD-DS-DSD256 (11.2 MHz)

• Dynamic Range: 130dB (ESS Sabre chipset in 8 mono to 2 stereo config.)

• Femtoclock Internal Clock Generator (lps jitter.) Wordclock In and Out, or sync to incoming digital

audio input with JET (tm) PLL. Time Domain Jitter Eliminator

• Headphone Amp: High Current, High Slew Rate ultra low distortion 1600mA Hi-Fi dual mono design,

0.25 Ohm impedance with gain selector switch

• Computer Audio Inputs and Outputs: Firewire 400/800 up to PCM 192k/DSD async, USB2.0 up to

384k/DSD256, USB 1.1 up to PCM 96k, driver-less. DSD DOP256 SDIF DSD input, optional SACD

optical input ***

• Digital Audio Inputs: SPDIF, AES/EBU, Toslink all up to 192k single wire. DSD-DSD256 SDIF DSD

input, optional SACD optical input ***

• Internal Hardware Upsampling to DSD256: Any digital signal can be upsampled to DSD256 for

superior DAC chipset performance*

• Internal PCM Hardware Upsampling: 16bit 44.1k etc. can be optionally upsampled prior to

conversion to 192k/24bit.

• Analog Attenuator: Transparent, 1dB stepped programmable, separate for main out and

headphones. Or 32 bit digital attenuator or relay bypass of the attenuator can be chosen by user

• Analog Inputs: 2 Unbalanced RCA, 1 Balanced XLR

• Linear Power Supplies, Separate: Oversized 50VA analog, 50VA digital, Worldwide

• Firmware updates: online, user downloadable, periodic feature upgrades

• Ability of converting standard digital audio inputs into computer FW/Thunderbolt input

• Apple aluminum remote (included) and universal remote capable

Special hardware options

• EMM Labs, Playback Design compatible optical SACD digital input board ***

• Ultra high preformance MM, MC phono preamplifier board ****

* DSD256 upsampling available in Q4/2014 via firmware update

** 115/230V 50/60 worlwide model, or 100V/230V Japanese model

(available only in Japan)

*** Available Q4/2014

**** Available Q1/2015