User's Manual

MYSPHERA • Ronda Auguste y Louis Lumiere 23, Nave 13 • 46980 Parque
Tecnológico de Valencia • Paterna, Valencia • Spain
Telf.: [phone] • [e-mail] • www.mysphera.com
Pág. 8
In this case, the indicator light will illuminate in red indicating this situation, until the bracelet
is removed from above the reader.
Ilustration 5 – Reader indicating a bracelet with a low battery (Red light)
To avoid unwanted readings, keep the wristbands about 20 cm away from the device. Move
the bracelet closer to the device only at the time you wish to read.
If you need to read the same bracelet several times in a row, follow the steps described,
and then remove the bracelet until the reader returns to the initial state (blue indicator light
without flickering). At that time you can reread the same bracelet.
4.1. Light indicator
The states of the reader HID indicator light are summarized below:
• • Ready (Blue): The reader is ready to read bracelets.
• • Locked (Yellow): The reader has read a bracelet successfully and is locked. You
will not read any more bracelets until the read bracelet is removed.
• • Low battery (Red): The detected bracelet has a low battery and must be removed
for battery replacement.
4.2. Recommendations for use
To facilitate the reading of bracelets, it is advisable to take into account some
considerations:
1. 1. Place the desired bracelet as close as possible to the reader's antenna.
2. 2. Place the bracelet with the screen printing facing up or towards the antenna to
improve reception.