User's Manual
MYSPHERA • Ronda Auguste y Louis Lumiere 23, Nave 13 • 46980 Parque
Tecnológico de Valencia • Paterna, Valencia • Spain
Telf.: +34 96 182 71 77 • info@mysphera.com • www.mysphera.com
Pág. 6
- Product identifier code:
o Start with 3 letters indicating type / family of the product.
o Followed by 2 letters indicating the type of interface and / or communication
of the product.
o Followed by 1 digit indicating version of the enclosures / enclosures /
mechanical encapsulation.
o Followed by 2 digits indicating the hardware version.
o Finishing with 2 digits that indicate the firmware version.
- IEEE adress: 12-digit alphanumeric MAC identification, unique for each device /
product manufactured.
- S / N: Serial number of the hardware used in that product.
o Internal product accounting code.
o Hardware manufacturing number.
- Electrical characteristics of use.
- Certification and marking symbols: CE and FCC
- Place and year of manufacture.
3. Instalation
It will be placed on the wall near the ceiling so that it is a little or nothing intrusive element
to the place where it is installed.
It will be powered with a microUSB cable.
For its operation it must be completed with other products that make up the installed set:
- - USB gateways
- - PC or multimedia device with USB connections.
4. Intended Use
Once the actuator and the USB Gateways are placed in place and connected to the
computer or multimedia device, the assembly can be considered to be in operation.
And it will indicate the output of Tags when overcoming the arc formed by the USB Gateway.