Specifications

 

T6 Radiator Series
MYSON
Optional Piping Arrangements
The following drawings are general
examples. They are diagrammatic only.
Consult a certified heating professional
for your specific application.
General information on the use of Monoflo tees:
• Scoop type is placed on the supply
• Venturi type on the return
• If heating unit is below main or more than 4
feet horizontally from the main, use two
monoflo tees facing each other
TheT6radiator is designedtobeconnected
usingthe2”ccbottomcenterconnections.
Theseconnectionsutilizetheefficientuseof
specialinternalpipingandtheincluded
internalThermostaticRadiatorValve.The
“HomeRunSystem”pipingwithamodulating
circulatoristhemostefficientinstallation
method.Thebottomcenterconnectionsalso
workwe
llwiththe“Monoflo(1Pipe)Syste
m”.
Ifconnectedinseries(“SeriesLoop”)an“H”
styleby‐passvalvemustbeusedandthecircuit
mustbelimitedto2gpm.Thismethodisnot
recommended.
TheT6radiatormayalsobeinstalledusingthe
alternateendpaneltappings,howeverthi
swill
rendertheinternalpipingandTRV
non‐
o
p
erationalandisnotrecommended.
8