21475 Whispa Manual - US:Layout 1 8/5/09 09:34 Page 1 MYSON Inc. 948 Hercules Drive, Suite 5, Colchester, Vermont VT05446 T: (802) 654-7500, F: (802) 654 7022, info@mysoninc.com, www.mysoninc.com Installation, Operating, Maintenance and After Sales Manual. WHISPA III ® 5000, 7000 & 9000 heatingthroughinnovation. heatingthroughinnovation. 01.05.
1475 Whispa Manual - US:Layout 1 8/5/09 09:34 Page 3 WHISPA III ® 5000, 7000 & 9000 G No rear access shall be available to the unit after installation. 2.0 Heating System Design 03 G MYSON WHISPA III® fan convectors are designed to be used with mono-flo Tees from a series loop, on a two pipe system, or as a stand alone zone. G Before proceeding with the installation, the heating system design must be considered and the unit correctly sized to meet the heat loss requirements of the room. 3.
21475 Whispa Manual - US:Layout 1 8/5/09 09:34 Page 3 WHISPA III ® 5000, 7000 & 9000 G No rear access shall be available to the unit after installation. 2.0 Heating System Design 03 G MYSON WHISPA III® fan convectors are designed to be used with mono-flo Tees from a series loop, on a two pipe system, or as a stand alone zone. G Before proceeding with the installation, the heating system design must be considered and the unit correctly sized to meet the heat loss requirements of the room. 3.
21475 Whispa Manual - US:Layout 1 04 8/5/09 09:34 Page 5 WHISPA III ® 5000, 7000 & 9000 5.0 Preparation WHISPA III ® 5000, 7000 & 9000 05 7.0 Water Connection (continued...) G A clean and level floor area is required under the cupboard base. For ease of installation and maintenance WHISPA III ® units should be installed with flexible hoses, with integral isolating valves. Flexible hoses are supplied only with the WHISPA III ® EZ units.
21475 Whispa Manual - US:Layout 1 04 8/5/09 09:34 Page 5 WHISPA III ® 5000, 7000 & 9000 5.0 Preparation WHISPA III ® 5000, 7000 & 9000 05 7.0 Water Connection (continued...) G A clean and level floor area is required under the cupboard base. For ease of installation and maintenance WHISPA III ® units should be installed with flexible hoses, with integral isolating valves. Flexible hoses are supplied only with the WHISPA III ® EZ units.
21475 Whispa Manual - US:Layout 1 06 8/5/09 09:34 Page 7 WHISPA III ® 5000, 7000 & 9000 WHISPA III ® 5000, 7000 & 9000 8.0 Fitting the WHISPA III ® 8.0 Fitting the WHISPA III ® G Position the WHISPA III® under the cupboard in the required location, with the front edge just behind the line of the plinth. G Ensure that the flexible hoses are not kinked and that the electrical cord is not in contact with hot surfaces.
21475 Whispa Manual - US:Layout 1 06 8/5/09 09:34 Page 7 WHISPA III ® 5000, 7000 & 9000 WHISPA III ® 5000, 7000 & 9000 8.0 Fitting the WHISPA III ® 8.0 Fitting the WHISPA III ® G Position the WHISPA III® under the cupboard in the required location, with the front edge just behind the line of the plinth. G Ensure that the flexible hoses are not kinked and that the electrical cord is not in contact with hot surfaces.
21475 Whispa Manual - US:Layout 1 08 8/5/09 09:34 Page 9 WHISPA III ® 5000, 7000 & 9000 9.0 Technical Data WHISPA III ® 5000, 7000 & 9000 10.0 Operating Instructions (continued...) This unit is controlled by the switches on the front of the unit. Heating Performance Data Model Fan Setting Boost 5000 Normal Boost Normal Boost 7000 Normal Boost Normal Boost 9000 Normal Boost Normal Flowrate (US gpm) 3 1 3 1 3 1 Ensure the electricity supply is switched on.
21475 Whispa Manual - US:Layout 1 08 8/5/09 09:34 Page 9 WHISPA III ® 5000, 7000 & 9000 9.0 Technical Data WHISPA III ® 5000, 7000 & 9000 10.0 Operating Instructions (continued...) This unit is controlled by the switches on the front of the unit. Heating Performance Data Model Fan Setting Boost 5000 Normal Boost Normal Boost 7000 Normal Boost Normal Boost 9000 Normal Boost Normal Flowrate (US gpm) 3 1 3 1 3 1 Ensure the electricity supply is switched on.
21475 Whispa Manual - US:Layout 1 09:34 Page 11 WHISPA III ® 5000, 7000 & 9000 WHISPA III ® 5000, 7000 & 9000 11.0 Troubleshooting 11 12.0 Maintenance installer or MYSON. Before calling your installer or MYSON, please carry out the checks listed below. Once installed this fan convector becomes an integral part of a complete heating system that includes boiler, pump, other emitters such as radiators and fan convectors, and a number of heating controls, dependent on system complexity.
21475 Whispa Manual - US:Layout 1 09:34 Page 11 WHISPA III ® 5000, 7000 & 9000 WHISPA III ® 5000, 7000 & 9000 11.0 Troubleshooting 11 12.0 Maintenance installer or MYSON. Before calling your installer or MYSON, please carry out the checks listed below. Once installed this fan convector becomes an integral part of a complete heating system that includes boiler, pump, other emitters such as radiators and fan convectors, and a number of heating controls, dependent on system complexity.
21475 Whispa Manual - US:Layout 1 8/5/09 09:34 Page 1 MYSON Inc. 948 Hercules Drive, Suite 5, Colchester, Vermont VT05446 T: (802) 654-7500, F: (802) 654 7022, info@mysoninc.com, www.mysoninc.com Installation, Operating, Maintenance and After Sales Manual. WHISPA III ® 5000, 7000 & 9000 heatingthroughinnovation. heatingthroughinnovation. 01.05.
