Technical data

05
KICKSPACE
®
500, 600, 600-12V & 800
l Position the KICKSPACE
®
under the cupboard in the required
location, with the front edge just behind the line of the plinth.
l Ensure that the flexible hoses are not kinked and that the
electrical cord is not in contact with hot surfaces.
l Replace the plinth and bring the KICKSPACE
®
forward into
the opening so the front edge projects 8mm through the
plinth (see Fig. 2).
l Align the grille and secure it to the unit with two screws
supplied (use the shorter screws). (See Fig. 3).
l Secure the unit/grille to the plinth with two screws supplied
(use the longer screws). (See Fig. 3).
l Complete the electrical installation, switch on and test the
KICKSPACE
®
(see Fig. 4).
7.0 Fitting the KICKSPACE
®
Top view of unit
8mm projection
Fig. 2
Grille securing screws
Front view of unit
Fig. 3
Unit securing screws
Switch for fan
Boost
Off
Normal
Summer/Winter switch
Fig. 4
5.06.0
7.0
KICKSPACE 500, 600, 600-12V & 800 INSTALLATION & MAINTENANCE MANUAL 01.01.2013 ISSUE 6
26690 Kickspace Manual for web_Layout 1 24/09/2013 10:08 Page 6