Technical data

05
HI-LINE Super RC
7.0 Water Connections
l Connect unit to system flow and return pipes using the two
22mm isolating valves (see fig. 3 & 4).
l Ensure system is flushed in accordance with recognised best
practice and a suitable inhibitor is added to the system as
necessary.
l Open valves fully, check pipe connections for leaks and vent
the heat exchanger - see Commissioning Procedure.
Fig. 4
Fig. 3
5.0
6.07.0
82
117
55
69
55
2123
201128
275
203
108
A
Mains cable entry
View on arrow
CEILING
20 mm min
CEILING
100 mm min
a) Rear pipe entry b) Top pipe entry
Unit A
Dimensions (mm)
29-20
25-18
1378
1168
23674 HiLine Super RC manual 27/06/2011 09:25 Page 6