Technical data

INSTALLATION & SERVICING INSTRUCTIONS
Fig. 14 Details of Pilot Assembly.
Fig. 1 5 Location of Thermostat Phial.
Page 20
9.0 SERVICING
This section describes the annual servicing procedure, and gives instructions for the replacement of
faulty parts. Servicing must be carried out by a competent person at least once a year.
WARNING: ALWAYS TURN OFF THE GAS SUPPLY AT THE INLET SERVICE COCK, AND
SWITCH OFF AND DISCONNECT THE ELECTRICITY SUPPLY TO THE APPLIANCE, BEFORE
COMMENCING SERVICING.
9.1 Annual Routine Service
This is normally confined to cleaning the main burner, main injector, pilot injector and heat exchanger,
and checking the operation of boiler control.
http://www.partsarena.com/baxi/System/DATA/Dx/DS1/installation/2102/I01-2102/I01-2102.htm (29 of 44)14/10/2004 17:30:48