Handheld Transmitter Microphone (MT-UM-03) User’s manual Version: 1.0 This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference.
Federal Communications Commission (FCC) Statement 15.21 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. 15.105(b) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
1. Product appearance and function description: 2. Operating Instructions: 2-1. Power on: Press the function key for 1 second (press down in the middle), and the display window will light up to power on. 2-2. Power off: press the function key for 1 second (press down in the middle), the display window will turn off and the power will be off. 2-3. Volume adjustment (music): the function key increases the volume up and down the volume decreases. (Host music volume adjustment) 2-4.
3-4-1. Please short press the HI / LO button to leave the channel setting mode. 3-4-2. Please follow the relevant setting procedures to change the channel settings at the receiver. (Change the same channel setting as the microphone) 3-5. With ACP automatic frequency pairing function, after the channel change and adjustment is completed, follow the steps below: 3-5-1. Please press the Pair button on the receiving end, the RF light will light up once (indicating that the channel pairing has been received).
