MYS Eaten Jones USER MANUAL MS PRECAUTIONS AND STANDARDS Before using the thermostat read this instructions carefully. After reading the instructions, keep this manual in a safe place and hand for future reference. WARNING The system and thermostat must be installed by qualified and authorized personnel. The system an thermostat does not contain parts halt can be repaired by the user. For repairs, always consult authorized service personnel.
FEATURES MS Backbit tactile thermostat with hourly programming M520. Wireless communication or Cable (RF or CABLE). Reprogramming hourly or manual control. Two installation possibilities, fixed on wall {RF or CABLE) or desktop installed with base (RF). Customization “Sleep” function. Customization menu: Ranges and customization temperature limits, Master Yes/No delectable by zone, stop total system mend installer/user, adjust aperture grilles... Integrated temperature probe. SharePoint temperature at 0.
REI IoR e pol hal 1 THERMOSTAT ON AND OFF Press (icon to turn ON or tum OFF thermostat. NOTE: The thermostat is OFF when “OFF” icon is displayed. The thermostat is ON when a "WORK MODE” icon is displayed. 2 WORK MODE CHANGE. The thermostat can have 2 or § working modes depending on whether the installation is only for ventilation or has a combined stage for underfloor heating. 1. Press a (3 icon to tum on the thermostats and show the available working modes. Usually only appears heal mode and cold mode. 2.
Rely seraglio Ln obis LR a This function it’s for mer or countdown to OFF thermostat. The thermostat have this timed cycles: 30/60/90/120 minutes. To set up this function, press =) icon in some working mode or tiredly in "Functions meninx. The display will show "0030", equivalent to 30 minutes, next to the text "TIMER" in the upper left comer. Each press on icon will increase the timed cycle. To cancel the Timer, press and hold =) jg on unt! the minute digits disappear and the text "TIMER" disappears.
FUNCTIONS M820 ci RR ee WARNING. THIS FUNCTION CAN NOT BE USED IF THE INSTALLATION DOES NOT HAVE THE TOTAL CONTROL MODULE GANGWAY AND THE THERMOSTAT 18 NOT CONFIGURED FOR THAT. With thermostat off, press oO fon, or if the thermostat is at rest, press anywhere gn display to aces “functions menu”. Next to the Cooling loon will appear fan icon 3 Each teems the rie icon is pressed, the fan sped will change between the right of the clock icon, the selected fan speed is marked manually.
BC ORR[e CF ra F Only underfloor refreshing. GC Only underfloor heating. OFF Thermostat off, grill closed. The remaining minutes are also displayed for the thermostat fo tum off automatically when the timer is running. Seem Sped Fan. A Automatic. F Fan speed fixed. 23 Low speed. Mid speed. Eight speed. Modal sped. QFF Total system stop. it also shows the set point temperature and the actual temperature. FF1/FF2 FF3/ FF4 FF5 Errors in the mode of operation of the installation. Day of the week: Monday.
