Specifications

MacOS X

If your host is running MacOS X, you can issue the command ioreg, which will return all

devices attached to the PCI bus. An excerpt of the sample output is as follows:

<…>

| | | +-o USBKeyLargo <class USBKeyLargo>

| | +-o pci14c1,8043@12 <class IOPCIDevice>

| | | +-o gm <class gm>

| | +-o usb@18 <class IOPCIDevice>

<…>

If the output you receive contains the “8043” device, the Myrinet/PCI interface has been

correctly detected, and you can now proceed to installing software. Refer to the “Guide to

Software” for details of the required software and for installation instructions.