Specifications

FreeBSD

If your host is running FreeBSD, you can issue the command /usr/sbin/pciconf -l.

Screen dump of /sbin/pciconf –l command

The third column gives the contents of the subvendor id register. The field consists of the

card ID in the upper half of the value and the card vendor ID in the lower half of the

value. The card ID for the Myrinet/PCI interface is 8043, and the vendor ID for Myricom

(as listed in the PCI Vendor registry) is 14c1. If the output you receive is similar to that

above, the Myrinet/PCI interface has been correctly detected, and you can now proceed

to installing software. Refer to the “Guide to Software” for details of the required

software and for installation instructions.