Specifications

Tru64

If your host is running Tru64, prior to booting the machine, or after halting the operating

system, at the SRM console prompt, type show conf

Screen dump of show conf command

In Slot 13, under “Option” you will see 804314C1. This field contains the card ID, 8043,

for the Myrinet/PCI interface, and the card vendor ID for Myricom, 14C1 (as listed in the

PCI Vendor registry). If the output you receive is similar to that above, the Myrinet/PCI

interface has been correctly detected, and you can now proceed to installing software.

Refer to the “Guide to Software” for details of the required software and for installation

instructions.