Operating Instructions

SENSE MCE IBC Operating Instruction
Page 28 of 46 Release Rev. D, 2020-12-15
© MYNXG Product GmbH, 2020. All rights reserved
3.4 Antennas
The MYNXG Sense MCE IBC is delivered with already pre-assembled antennas. There are three
antennas in the device.
▪ Cellular / LTE rigid fiberglass internal antenna (Figure 8)
▪ Wi-Fi printed antenna (Figure 9)
▪ Sub-1GHz SRD printed antenna (Figure 10)
Figure 8: Antennas for LTE and WCDMA Networks with U.FL connector
Figure 9: Wi-Fi on module printed antenna
Figure 10: Sub-1GHz SRD printed antenna
CAUTION
Please note: The LTE antennas have a U.FL connector and shall be placed
only on U.FL sockets (Figure 8).
3.5 Electrical Power
The Sense MCE IBC is only battery operated.
WARNING
The Sense MCE IBC battery is fully compliant under IEC 62133 2nd. Ed.
No other battery except the one approved and assembled is allowed to
be used.