Operating Instructions

SENSE MCE IBC Operating Instruction
Page 18 of 46 Release Rev. D, 2020-12-15
© MYNXG Product GmbH, 2020. All rights reserved
2.1 Product Number
The Product (Identification) Number (PN) is a unique identifier, assigned to each finished /
manufactured product which is ready, to be marketed or for sale. The number is printed
together with the serial number (SN) on a MYNXG label (see example given in Figure 1) which
is placed on the Sense MCE IBC device.
Sense MCE IBC
PN 410012
SN 00001234
Rated Voltage: 4.2 [V]
Rated Current: 3 [A]
T amb: -20
o
C..+ 55
o
C
IP66
Made in Germany
Year of Construction XX
FCC ID: 2ASE6SENSEMCEIBC
Contains FCC IDs:
ZMONL668AM00,
2AC7Z-ESPWROOM32D
Contains IC IDs:
21374-NL668AM00,
21098-ESPWROOM32D
IC: 26095-SENSEMCEIBC
WARNING - DO NOT CHARGE THE BATTERY IN
HAZARDOUS LOCATION
Figure 1: Sense MCE IBC identification label
The Sense MCE IBC has for North America the following product number:
▪ 410012 Operates in North America
2.2 Key Benefits
The key benefits of Sense MCE IBC are:
▪ Sense MCE IBC is a unique, battery operated, multi communication and secure
device.
▪ Sense MCE IBC supports:
o LTE / 3G (3GPP Modem) with push-pull MicroSIM holder
o Wi-Fi 802.11 b/g /n
o Sub-1GHz Network (ISM 915 MHz Bands)
▪ Piezo for ultrasonic sensing measurements of fill level
▪ Sense MCE IBC runs on ARM® Cortex®-M4 RISC Core
▪ MYNXG hardware-based security implemented Trusted Platform Module (highest
level of security).
The Operating System (MYNXG SensorOS) is powering the Sense MCE IBC:
▪ MYNXG SensorOS is based on FreeRTOS™, an open-source operating system
published under the MIT open source license, including:
o Rich collection of MYNXG libraries optimized for highest performance.
o Access to large application development community.
▪ MYNXG Over-The-Air (OTA) service support from the cloud for remote software
updates including white-listing of the entire based software (secure signing).