Operating Instruction

EDGE FCR 3 Operating Instruction

Rev. C, 2019-09-10 Release Page 9 of 64

1. Safety Regulations

Before installing and using the EDGE FCR 3 Industrial computing device, please read the

following safety and handling instructions carefully. Every owner / user of the EDGE FCR 3

should have understood the complete content and be aware of potential direct or indirect

hazards of operators, other parties, stationary / mobile equipment, environmental and

facilities by disregarding of warnings. This device must be professionally installed.

1.1 Terms Used

IMPORTANT NOTICE

Throughout this User's Guide, hazardous situations or operations are

identified by WARNING, CAUTION and NOTICE, where:

Sign

Meaning

is used whenever you or somebody else could be

injured if you do not observe the accompanying

safety regulation.

is used to address issues related to possible

hardware damage.

is used to address operational issues not related

to personal injury or hardware damages.

1.2 User Groups

This manual is intended for personnel with the following expertise:

Area

Expertise

Installation

Experts

Start-up, operation

and shutdown

Experts

Trained personnel

Maintenance

Experts

Troubleshooting

Experts