Operating Instruction

EDGE FCR 3 Operating Instruction

Page 34 of 64 Release Rev. C, 2019-09-10

Releasing the cables from the push-in spring connector:

1. Take a flat-head screw driver size 0.30 x 1.8mm.

2. Push the screw driver gently into the release slot below the cable.

3. Simultaneously, pull carefully the cable without too much force out of the socket

(Figure 24).

Figure 24: Releasing the cable from the push-in spring socket

CAUTION

The release slot is quite tiny and sensitive, thus, using a too big tool or

pushing with force may easily cause serious damages. Avoid strong

jerking at the cable during the release procedure, too.