Operating Instruction

EDGE FCR 3 Operating Instruction
Rev. C, 2019-09-10 Release Page 27 of 64
© MYNXG Product GmbH, 2019. All rights reserved
Figure 14: DIN-rail fixture
The device can be clipped on the DIN rail by placing the hinging from the top on the rail and
moving it carefully downwards until the fixture snaps in.
To release / dismount the EDGE FCR 3 from the DIN-rail, the black strap needs to be pushed
downwards carefully until the spring mechanism releases the device (Figure 15).
Figure 15: Releasing the DIN-rail fixture